Actual source code: mpiuopen.c

petsc-3.7.3 2016-08-01
Report Typos and Errors
  1: #define PETSC_DESIRE_FEATURE_TEST_MACROS /* for popen */
  2: /*
  3:       Some PETSc utilites routines to add simple parallel IO capability
  4: */
  5: #include <petscsys.h>

  7: #include <errno.h>

 11: /*@C
 12:     PetscFOpen - Has the first process in the communicator open a file;
 13:     all others do nothing.

 15:     Logically Collective on MPI_Comm

 17:     Input Parameters:
 18: +   comm - the communicator
 19: .   name - the filename
 20: -   mode - the mode for fopen(), usually "w"

 22:     Output Parameter:
 23: .   fp - the file pointer

 25:     Level: developer

 27:     Notes:
 28:        NULL (0), "stderr" or "stdout" may be passed in as the filename

 30:     Fortran Note:
 31:     This routine is not supported in Fortran.

 33:     Concepts: opening ASCII file
 34:     Concepts: files^opening ASCII

 36: .seealso: PetscFClose(), PetscSynchronizedFGets(), PetscSynchronizedPrintf(), PetscSynchronizedFlush(),
 37:           PetscFPrintf()
 38: @*/
 39: PetscErrorCode  PetscFOpen(MPI_Comm comm,const char name[],const char mode[],FILE **fp)
 40: {
 42:   PetscMPIInt    rank;
 43:   FILE           *fd;
 44:   char           fname[PETSC_MAX_PATH_LEN],tname[PETSC_MAX_PATH_LEN];

 47:   MPI_Comm_rank(comm,&rank);
 48:   if (!rank) {
 49:     PetscBool isstdout,isstderr;
 50:     PetscStrcmp(name,"stdout",&isstdout);
 51:     PetscStrcmp(name,"stderr",&isstderr);
 52:     if (isstdout || !name) fd = PETSC_STDOUT;
 53:     else if (isstderr) fd = PETSC_STDERR;
 54:     else {
 55:       PetscStrreplace(PETSC_COMM_SELF,name,tname,PETSC_MAX_PATH_LEN);
 56:       PetscFixFilename(tname,fname);
 57:       PetscInfo1(0,"Opening file %s\n",fname);
 58:       fd   = fopen(fname,mode);
 59:       if (!fd) SETERRQ1(PETSC_COMM_SELF,PETSC_ERR_FILE_OPEN,"Unable to open file %s\n",fname);
 60:     }
 61:   } else fd = 0;
 62:   *fp = fd;
 63:   return(0);
 64: }

 68: /*@
 69:     PetscFClose - Has the first processor in the communicator close a
 70:     file; all others do nothing.

 72:     Logically Collective on MPI_Comm

 74:     Input Parameters:
 75: +   comm - the communicator
 76: -   fd - the file, opened with PetscFOpen()

 78:    Level: developer

 80:     Fortran Note:
 81:     This routine is not supported in Fortran.

 83:     Concepts: files^closing ASCII
 84:     Concepts: closing file

 86: .seealso: PetscFOpen()
 87: @*/
 88: PetscErrorCode  PetscFClose(MPI_Comm comm,FILE *fd)
 89: {
 91:   PetscMPIInt    rank;
 92:   int            err;

 95:   MPI_Comm_rank(comm,&rank);
 96:   if (!rank && fd != PETSC_STDOUT && fd != PETSC_STDERR) {
 97:     err = fclose(fd);
 98:     if (err) SETERRQ(PETSC_COMM_SELF,PETSC_ERR_SYS,"fclose() failed on file");
 99:   }
100:   return(0);
101: }

103: #if defined(PETSC_HAVE_POPEN)
104: static char PetscPOpenMachine[128] = "";

108: /*@C
109:       PetscPClose - Closes (ends) a program on processor zero run with PetscPOpen()

111:      Collective on MPI_Comm, but only process 0 runs the command

113:    Input Parameters:
114: +   comm - MPI communicator, only processor zero runs the program
115: -   fp - the file pointer where program input or output may be read or NULL if don't care

117:    Output Parameters:
118: .   rval - return value from pclose() or NULL to raise an error on failure

120:    Level: intermediate

122:    Notes:
123:        Does not work under Windows

125: .seealso: PetscFOpen(), PetscFClose(), PetscPOpen()

127: @*/
128: PetscErrorCode PetscPClose(MPI_Comm comm,FILE *fd,int *rval)
129: {
131:   PetscMPIInt    rank;
132:   int            err;

135:   MPI_Comm_rank(comm,&rank);
136:   if (!rank) {
137:     char buf[1024];
138:     while (fgets(buf,1024,fd)) ; /* wait till it prints everything */
139:     err = pclose(fd);
140:     if (rval) *rval = err;
141:     else if (err) SETERRQ2(PETSC_COMM_SELF,PETSC_ERR_SYS,"pclose() failed with error code %d, errno %d",err,errno);
142:   }
143:   return(0);
144: }


149: /*@C
150:       PetscPOpen - Runs a program on processor zero and sends either its input or output to
151:           a file.

153:      Logically Collective on MPI_Comm, but only process 0 runs the command

155:    Input Parameters:
156: +   comm - MPI communicator, only processor zero runs the program
157: .   machine - machine to run command on or NULL, or string with 0 in first location
158: .   program - name of program to run
159: -   mode - either r or w

161:    Output Parameter:
162: .   fp - the file pointer where program input or output may be read or NULL if don't care

164:    Level: intermediate

166:    Notes:
167:        Use PetscPClose() to close the file pointer when you are finished with it
168:        Does not work under Windows

170:        If machine is not provided will use the value set with PetsPOpenSetMachine() if that was provided, otherwise
171:        will use the machine running node zero of the communicator

173:        The program string may contain ${DISPLAY}, ${HOMEDIRECTORY} or ${WORKINGDIRECTORY}; these
174:     will be replaced with relevent values.

176: .seealso: PetscFOpen(), PetscFClose(), PetscPClose(), PetscPOpenSetMachine()

178: @*/
179: PetscErrorCode  PetscPOpen(MPI_Comm comm,const char machine[],const char program[],const char mode[],FILE **fp)
180: {
182:   PetscMPIInt    rank;
183:   size_t         i,len,cnt;
184:   char           commandt[PETSC_MAX_PATH_LEN],command[PETSC_MAX_PATH_LEN];
185:   FILE           *fd;

188:   /* all processors have to do the string manipulation because PetscStrreplace() is a collective operation */
189:   if (PetscPOpenMachine[0] || (machine && machine[0])) {
190:     PetscStrcpy(command,"ssh ");
191:     if (PetscPOpenMachine[0]) {
192:       PetscStrcat(command,PetscPOpenMachine);
193:     } else {
194:       PetscStrcat(command,machine);
195:     }
196:     PetscStrcat(command," \" export DISPLAY=${DISPLAY}; ");
197:     /*
198:         Copy program into command but protect the " with a \ in front of it
199:     */
200:     PetscStrlen(command,&cnt);
201:     PetscStrlen(program,&len);
202:     for (i=0; i<len; i++) {
203:       if (program[i] == '\"') command[cnt++] = '\\';
204:       command[cnt++] = program[i];
205:     }
206:     command[cnt] = 0;

208:     PetscStrcat(command,"\"");
209:   } else {
210:     PetscStrcpy(command,program);
211:   }

213:   PetscStrreplace(comm,command,commandt,1024);

215:   MPI_Comm_rank(comm,&rank);
216:   if (!rank) {
217:     PetscInfo1(0,"Running command :%s\n",commandt);
218:     if (!(fd = popen(commandt,mode))) SETERRQ1(PETSC_COMM_SELF,PETSC_ERR_LIB,"Cannot run command %s",commandt);
219:     if (fp) *fp = fd;
220:   }
221:   return(0);
222: }

226: /*@C
227:       PetscPOpenSetMachine - Sets the name of the default machine to run PetscPOpen() calls on

229:      Logically Collective on MPI_Comm, but only process 0 runs the command

231:    Input Parameter:
232: .   machine - machine to run command on or NULL to remove previous entry

234:    Options Database:
235: .   -popen_machine <machine>

237:    Level: intermediate

239: .seealso: PetscFOpen(), PetscFClose(), PetscPClose(), PetscPOpen()

241: @*/
242: PetscErrorCode  PetscPOpenSetMachine(const char machine[])
243: {

247:   if (machine) {
248:     PetscStrcpy(PetscPOpenMachine,machine);
249:   } else {
250:     PetscPOpenMachine[0] = 0;
251:   }
252:   return(0);
253: }

255: #endif