Actual source code: mpimesg.c
petsc-3.6.4 2016-04-12
2: #include <petscsys.h> /*I "petscsys.h" I*/
7: /*@C
8: PetscGatherNumberOfMessages - Computes the number of messages a node expects to receive
10: Collective on MPI_Comm
12: Input Parameters:
13: + comm - Communicator
14: . iflags - an array of integers of length sizeof(comm). A '1' in ilengths[i] represent a
15: message from current node to ith node. Optionally NULL
16: - ilengths - Non zero ilengths[i] represent a message to i of length ilengths[i].
17: Optionally NULL.
19: Output Parameters:
20: . nrecvs - number of messages received
22: Level: developer
24: Concepts: mpi utility
26: Notes:
27: With this info, the correct message lengths can be determined using
28: PetscGatherMessageLengths()
30: Either iflags or ilengths should be provided. If iflags is not
31: provided (NULL) it can be computed from ilengths. If iflags is
32: provided, ilengths is not required.
34: .seealso: PetscGatherMessageLengths()
35: @*/
36: PetscErrorCode PetscGatherNumberOfMessages(MPI_Comm comm,const PetscMPIInt iflags[],const PetscMPIInt ilengths[],PetscMPIInt *nrecvs)
37: {
38: PetscMPIInt size,rank,*recv_buf,i,*iflags_local = NULL,*iflags_localm = NULL;
42: MPI_Comm_size(comm,&size);
43: MPI_Comm_rank(comm,&rank);
45: PetscMalloc2(size,&recv_buf,size,&iflags_localm);
47: /* If iflags not provided, compute iflags from ilengths */
48: if (!iflags) {
49: if (!ilengths) SETERRQ(PETSC_COMM_SELF,PETSC_ERR_ARG_WRONGSTATE,"Either iflags or ilengths should be provided");
50: iflags_local = iflags_localm;
51: for (i=0; i<size; i++) {
52: if (ilengths[i]) iflags_local[i] = 1;
53: else iflags_local[i] = 0;
54: }
55: } else iflags_local = (PetscMPIInt*) iflags;
57: /* Post an allreduce to determine the numer of messages the current node will receive */
58: MPI_Allreduce(iflags_local,recv_buf,size,MPI_INT,MPI_SUM,comm);
59: *nrecvs = recv_buf[rank];
61: PetscFree2(recv_buf,iflags_localm);
62: return(0);
63: }
68: /*@C
69: PetscGatherMessageLengths - Computes info about messages that a MPI-node will receive,
70: including (from-id,length) pairs for each message.
72: Collective on MPI_Comm
74: Input Parameters:
75: + comm - Communicator
76: . nsends - number of messages that are to be sent.
77: . nrecvs - number of messages being received
78: - ilengths - an array of integers of length sizeof(comm)
79: a non zero ilengths[i] represent a message to i of length ilengths[i]
82: Output Parameters:
83: + onodes - list of node-ids from which messages are expected
84: - olengths - corresponding message lengths
86: Level: developer
88: Concepts: mpi utility
90: Notes:
91: With this info, the correct MPI_Irecv() can be posted with the correct
92: from-id, with a buffer with the right amount of memory required.
94: The calling function deallocates the memory in onodes and olengths
96: To determine nrecevs, one can use PetscGatherNumberOfMessages()
98: .seealso: PetscGatherNumberOfMessages()
99: @*/
100: PetscErrorCode PetscGatherMessageLengths(MPI_Comm comm,PetscMPIInt nsends,PetscMPIInt nrecvs,const PetscMPIInt ilengths[],PetscMPIInt **onodes,PetscMPIInt **olengths)
101: {
103: PetscMPIInt size,tag,i,j;
104: MPI_Request *s_waits = NULL,*r_waits = NULL;
105: MPI_Status *w_status = NULL;
108: MPI_Comm_size(comm,&size);
109: PetscCommGetNewTag(comm,&tag);
111: /* cannot use PetscMalloc3() here because in the call to MPI_Waitall() they MUST be contiguous */
112: PetscMalloc2(nrecvs+nsends,&r_waits,nrecvs+nsends,&w_status);
113: s_waits = r_waits+nrecvs;
115: /* Post the Irecv to get the message length-info */
116: PetscMalloc1(nrecvs,olengths);
117: for (i=0; i<nrecvs; i++) {
118: MPI_Irecv((*olengths)+i,1,MPI_INT,MPI_ANY_SOURCE,tag,comm,r_waits+i);
119: }
121: /* Post the Isends with the message length-info */
122: for (i=0,j=0; i<size; ++i) {
123: if (ilengths[i]) {
124: MPI_Isend((void*)(ilengths+i),1,MPI_INT,i,tag,comm,s_waits+j);
125: j++;
126: }
127: }
129: /* Post waits on sends and receivs */
130: if (nrecvs+nsends) {MPI_Waitall(nrecvs+nsends,r_waits,w_status);}
132: /* Pack up the received data */
133: PetscMalloc1(nrecvs,onodes);
134: for (i=0; i<nrecvs; ++i) (*onodes)[i] = w_status[i].MPI_SOURCE;
135: PetscFree2(r_waits,w_status);
136: return(0);
137: }
141: /*@C
142: PetscGatherMessageLengths2 - Computes info about messages that a MPI-node will receive,
143: including (from-id,length) pairs for each message. Same functionality as PetscGatherMessageLengths()
144: except it takes TWO ilenths and output TWO olengths.
146: Collective on MPI_Comm
148: Input Parameters:
149: + comm - Communicator
150: . nsends - number of messages that are to be sent.
151: . nrecvs - number of messages being received
152: - ilengths1, ilengths2 - array of integers of length sizeof(comm)
153: a non zero ilengths[i] represent a message to i of length ilengths[i]
155: Output Parameters:
156: + onodes - list of node-ids from which messages are expected
157: - olengths1, olengths2 - corresponding message lengths
159: Level: developer
161: Concepts: mpi utility
163: Notes:
164: With this info, the correct MPI_Irecv() can be posted with the correct
165: from-id, with a buffer with the right amount of memory required.
167: The calling function deallocates the memory in onodes and olengths
169: To determine nrecevs, one can use PetscGatherNumberOfMessages()
171: .seealso: PetscGatherMessageLengths() and PetscGatherNumberOfMessages()
172: @*/
173: PetscErrorCode PetscGatherMessageLengths2(MPI_Comm comm,PetscMPIInt nsends,PetscMPIInt nrecvs,const PetscMPIInt ilengths1[],const PetscMPIInt ilengths2[],PetscMPIInt **onodes,PetscMPIInt **olengths1,PetscMPIInt **olengths2)
174: {
176: PetscMPIInt size,tag,i,j,*buf_s = NULL,*buf_r = NULL,*buf_j = NULL;
177: MPI_Request *s_waits = NULL,*r_waits = NULL;
178: MPI_Status *w_status = NULL;
181: MPI_Comm_size(comm,&size);
182: PetscCommGetNewTag(comm,&tag);
184: /* cannot use PetscMalloc5() because r_waits and s_waits must be contiquous for the call to MPI_Waitall() */
185: PetscMalloc4(nrecvs+nsends,&r_waits,2*nrecvs,&buf_r,2*nsends,&buf_s,nrecvs+nsends,&w_status);
186: s_waits = r_waits + nrecvs;
188: /* Post the Irecv to get the message length-info */
189: PetscMalloc1(nrecvs+1,olengths1);
190: PetscMalloc1(nrecvs+1,olengths2);
191: for (i=0; i<nrecvs; i++) {
192: buf_j = buf_r + (2*i);
193: MPI_Irecv(buf_j,2,MPI_INT,MPI_ANY_SOURCE,tag,comm,r_waits+i);
194: }
196: /* Post the Isends with the message length-info */
197: for (i=0,j=0; i<size; ++i) {
198: if (ilengths1[i]) {
199: buf_j = buf_s + (2*j);
200: buf_j[0] = *(ilengths1+i);
201: buf_j[1] = *(ilengths2+i);
202: MPI_Isend(buf_j,2,MPI_INT,i,tag,comm,s_waits+j);
203: j++;
204: }
205: }
206: if (j != nsends) SETERRQ2(PETSC_COMM_SELF,PETSC_ERR_PLIB,"j %d not equal to expected number of sends %d\n",j,nsends);
208: /* Post waits on sends and receivs */
209: if (nrecvs+nsends) {MPI_Waitall(nrecvs+nsends,r_waits,w_status);}
212: /* Pack up the received data */
213: PetscMalloc1(nrecvs+1,onodes);
214: for (i=0; i<nrecvs; ++i) {
215: (*onodes)[i] = w_status[i].MPI_SOURCE;
216: buf_j = buf_r + (2*i);
217: (*olengths1)[i] = buf_j[0];
218: (*olengths2)[i] = buf_j[1];
219: }
221: PetscFree4(r_waits,buf_r,buf_s,w_status);
222: return(0);
223: }
225: /*
227: Allocate a bufffer sufficient to hold messages of size specified in olengths.
228: And post Irecvs on these buffers using node info from onodes
230: */
233: PetscErrorCode PetscPostIrecvInt(MPI_Comm comm,PetscMPIInt tag,PetscMPIInt nrecvs,const PetscMPIInt onodes[],const PetscMPIInt olengths[],PetscInt ***rbuf,MPI_Request **r_waits)
234: {
236: PetscInt **rbuf_t,i,len = 0;
237: MPI_Request *r_waits_t;
240: /* compute memory required for recv buffers */
241: for (i=0; i<nrecvs; i++) len += olengths[i]; /* each message length */
243: /* allocate memory for recv buffers */
244: PetscMalloc1(nrecvs+1,&rbuf_t);
245: PetscMalloc1(len,&rbuf_t[0]);
246: for (i=1; i<nrecvs; ++i) rbuf_t[i] = rbuf_t[i-1] + olengths[i-1];
248: /* Post the receives */
249: PetscMalloc1(nrecvs,&r_waits_t);
250: for (i=0; i<nrecvs; ++i) {
251: MPI_Irecv(rbuf_t[i],olengths[i],MPIU_INT,onodes[i],tag,comm,r_waits_t+i);
252: }
254: *rbuf = rbuf_t;
255: *r_waits = r_waits_t;
256: return(0);
257: }
261: PetscErrorCode PetscPostIrecvScalar(MPI_Comm comm,PetscMPIInt tag,PetscMPIInt nrecvs,const PetscMPIInt onodes[],const PetscMPIInt olengths[],PetscScalar ***rbuf,MPI_Request **r_waits)
262: {
264: PetscMPIInt i;
265: PetscScalar **rbuf_t;
266: MPI_Request *r_waits_t;
267: PetscInt len = 0;
270: /* compute memory required for recv buffers */
271: for (i=0; i<nrecvs; i++) len += olengths[i]; /* each message length */
273: /* allocate memory for recv buffers */
274: PetscMalloc1(nrecvs+1,&rbuf_t);
275: PetscMalloc1(len,&rbuf_t[0]);
276: for (i=1; i<nrecvs; ++i) rbuf_t[i] = rbuf_t[i-1] + olengths[i-1];
278: /* Post the receives */
279: PetscMalloc1(nrecvs,&r_waits_t);
280: for (i=0; i<nrecvs; ++i) {
281: MPI_Irecv(rbuf_t[i],olengths[i],MPIU_SCALAR,onodes[i],tag,comm,r_waits_t+i);
282: }
284: *rbuf = rbuf_t;
285: *r_waits = r_waits_t;
286: return(0);
287: }