Actual source code: daindex.c
1: /*
2: Code for manipulating distributed regular arrays in parallel.
3: */
5: #include <petsc/private/dmdaimpl.h>
7: /*
8: Gets the natural number for each global number on the process.
10: Used by DMDAGetAO() and DMDAGlobalToNatural_Create()
11: */
12: PetscErrorCode DMDAGetNatural_Private(DM da, PetscInt *outNlocal, IS *isnatural)
13: {
14: PetscInt Nlocal, i, j, k, *lidx, lict = 0, dim = da->dim;
15: DM_DA *dd = (DM_DA *)da->data;
17: PetscFunctionBegin;
18: Nlocal = (dd->xe - dd->xs);
19: if (dim > 1) Nlocal *= (dd->ye - dd->ys);
20: if (dim > 2) Nlocal *= (dd->ze - dd->zs);
22: PetscCall(PetscMalloc1(Nlocal, &lidx));
24: if (dim == 1) {
25: for (i = dd->xs; i < dd->xe; i++) {
26: /* global number in natural ordering */
27: lidx[lict++] = i;
28: }
29: } else if (dim == 2) {
30: for (j = dd->ys; j < dd->ye; j++) {
31: for (i = dd->xs; i < dd->xe; i++) {
32: /* global number in natural ordering */
33: lidx[lict++] = i + j * dd->M * dd->w;
34: }
35: }
36: } else if (dim == 3) {
37: for (k = dd->zs; k < dd->ze; k++) {
38: for (j = dd->ys; j < dd->ye; j++) {
39: for (i = dd->xs; i < dd->xe; i++) lidx[lict++] = i + j * dd->M * dd->w + k * dd->M * dd->N * dd->w;
40: }
41: }
42: }
43: *outNlocal = Nlocal;
44: PetscCall(ISCreateGeneral(PetscObjectComm((PetscObject)da), Nlocal, lidx, PETSC_OWN_POINTER, isnatural));
45: PetscFunctionReturn(PETSC_SUCCESS);
46: }
48: /*@C
49: DMDASetAOType - Sets the type of application ordering to create with `DMDAGetAO()`, for a distributed array.
51: Collective
53: Input Parameters:
54: + da - the `DMDA`
55: - aotype - type of `AO`. `AOType` which can be `AOBASIC`, `AOADVANCED`, `AOMAPPING`, or `AOMEMORYSCALABLE`
57: Level: intermediate
59: Note:
60: It will generate an error if an `AO` has already been obtained with a call to `DMDAGetAO()` and the user sets a different `AOType`
62: .seealso: [](sec_struct), `DM`, `DMDA`, `DMDACreate2d()`, `DMDAGetAO()`, `DMDAGetGhostCorners()`, `DMDAGetCorners()`, `DMLocalToGlobal()`
63: `DMGlobalToLocalBegin()`, `DMGlobalToLocalEnd()`, `DMLocalToLocalBegin()`, `DMLocalToLocalEnd()`, `DMDAGetGlobalIndices()`, `DMDAGetOwnershipRanges()`,
64: `AO`, `AOPetscToApplication()`, `AOApplicationToPetsc()`, `AOType`, `AOBASIC`, `AOADVANCED`, `AOMAPPING`, `AOMEMORYSCALABLE`
65: @*/
66: PetscErrorCode DMDASetAOType(DM da, AOType aotype)
67: {
68: DM_DA *dd;
69: PetscBool isdmda;
71: PetscFunctionBegin;
73: PetscCall(PetscObjectTypeCompare((PetscObject)da, DMDA, &isdmda));
74: PetscCheck(isdmda, PetscObjectComm((PetscObject)da), PETSC_ERR_SUP, "Requires a DMDA as input");
75: /* now we can safely dereference */
76: dd = (DM_DA *)da->data;
77: if (dd->ao) { /* check if the already computed AO has the same type as requested */
78: PetscBool match;
79: PetscCall(PetscObjectTypeCompare((PetscObject)dd->ao, aotype, &match));
80: PetscCheck(match, PetscObjectComm((PetscObject)da), PETSC_ERR_SUP, "Cannot change AO type");
81: PetscFunctionReturn(PETSC_SUCCESS);
82: }
83: PetscCall(PetscFree(dd->aotype));
84: PetscCall(PetscStrallocpy(aotype, (char **)&dd->aotype));
85: PetscFunctionReturn(PETSC_SUCCESS);
86: }
88: /*@
89: DMDAGetAO - Gets the application ordering context for a distributed array.
91: Collective
93: Input Parameter:
94: . da - the `DMDA`
96: Output Parameter:
97: . ao - the application ordering context for `DMDA`
99: Level: intermediate
101: Notes:
102: In this case, the `AO` maps to the natural grid ordering that would be used
103: for the `DMDA` if only 1 processor were employed (ordering most rapidly in the
104: x-direction, then y, then z). Multiple degrees of freedom are numbered
105: for each node (rather than 1 component for the whole grid, then the next
106: component, etc.)
108: Do NOT call `AODestroy()` on the `ao` returned by this function.
110: .seealso: [](sec_struct), `DM`, `DMDA`, `DMDACreate2d()`, `DMDASetAOType()`, `DMDAGetGhostCorners()`, `DMDAGetCorners()`, `DMLocalToGlobal()`
111: `DMGlobalToLocalBegin()`, `DMGlobalToLocalEnd()`, `DMLocalToLocalBegin()`, `DMLocalToLocalEnd()`, `DMDAGetOwnershipRanges()`,
112: `AO`, `AOPetscToApplication()`, `AOApplicationToPetsc()`
113: @*/
114: PetscErrorCode DMDAGetAO(DM da, AO *ao)
115: {
116: DM_DA *dd;
117: PetscBool isdmda;
119: PetscFunctionBegin;
121: PetscAssertPointer(ao, 2);
122: PetscCall(PetscObjectTypeCompare((PetscObject)da, DMDA, &isdmda));
123: PetscCheck(isdmda, PetscObjectComm((PetscObject)da), PETSC_ERR_SUP, "Requires a DMDA as input");
124: /* now we can safely dereference */
125: dd = (DM_DA *)da->data;
127: /*
128: Build the natural ordering to PETSc ordering mappings.
129: */
130: if (!dd->ao) {
131: IS ispetsc, isnatural;
132: PetscInt Nlocal;
134: PetscCall(DMDAGetNatural_Private(da, &Nlocal, &isnatural));
135: PetscCall(ISCreateStride(PetscObjectComm((PetscObject)da), Nlocal, dd->base, 1, &ispetsc));
136: PetscCall(AOCreate(PetscObjectComm((PetscObject)da), &dd->ao));
137: PetscCall(AOSetIS(dd->ao, isnatural, ispetsc));
138: PetscCall(AOSetType(dd->ao, dd->aotype));
139: PetscCall(ISDestroy(&ispetsc));
140: PetscCall(ISDestroy(&isnatural));
141: }
142: *ao = dd->ao;
143: PetscFunctionReturn(PETSC_SUCCESS);
144: }