Getting Started#

PETSc consists of a collection of classes, which are discussed in detail in later parts of the manual (The Solvers in PETSc/TAO and Additional Information). The important PETSc classes include

index sets (IS), for indexing into vectors, renumbering, permuting, etc;
Vectors and Parallel Data (Vec);
(generally sparse) Matrices (Mat)
KSP: Linear System Solvers (KSP);
preconditioners, including multigrid, block solvers, patch solvers, and sparse direct solvers (PC);
SNES: Nonlinear Solvers (SNES);
TS: Scalable ODE and DAE Solvers for solving time-dependent (nonlinear) PDEs, including support for differential-algebraic-equations, and the computation of adjoints (sensitivities/gradients of the solutions) (TS);
scalable TAO: Optimization Solvers including a rich set of gradient-based optimizers, Newton-based optimizers and optimization with constraints (Tao).
DM Basics code for managing interactions between mesh data structures and vectors, matrices, and solvers (DM);

Each class consists of an abstract interface (simply a set of calling sequences corresponding to an abstract base class in C++) and an implementation for each algorithm and data structure. This design enables easy comparison and use of different algorithms (for example, experimenting with different Krylov subspace methods, preconditioners, or truncated Newton methods). Hence, PETSc provides a rich environment for modeling scientific applications as well as for rapid algorithm design and prototyping.

The classes enable easy customization and extension of both algorithms and implementations. This approach promotes code reuse and flexibility. The PETSc infrastructure creates a foundation for building large-scale applications.

It is useful to consider the interrelationships among different pieces of PETSc. Numerical Libraries in PETSc is a diagram of some of these pieces. The figure illustrates the library’s hierarchical organization, enabling users to employ the most appropriate solvers for a particular problem.

Running PETSc Programs#

Before using PETSc, the user must first set the environmental variable PETSC_DIR to indicate the full path of the PETSc home directory. For example, under the Unix bash shell, a command of the form

$ export PETSC_DIR=$HOME/petsc

can be placed in the user’s .bashrc or other startup file. In addition, the user may need to set the environment variable $PETSC_ARCH to specify a particular configuration of the PETSc libraries. Note that $PETSC_ARCH is just a name selected by the installer to refer to the libraries compiled for a particular set of compiler options and machine type. Using different values of $PETSC_ARCH allows one to switch between several different sets (say debug and optimized versions) of libraries easily. To determine if you need to set $PETSC_ARCH, look in the directory indicated by $PETSC_DIR, if there are subdirectories beginning with arch then those subdirectories give the possible values for $PETSC_ARCH.

See Tutorials, by Mathematical Problem to immediately jump in and run PETSc code.

All PETSc programs use the MPI (Message Passing Interface) standard for message-passing communication [For94]. Thus, to execute PETSc programs, users must know the procedure for beginning MPI jobs on their selected computer system(s). For instance, when using the MPICH implementation of MPI and many others, the following command initiates a program that uses eight processors:

$ mpiexec -n 8 ./petsc_program_name petsc_options

PETSc also provides a script that automatically uses the correct mpiexec for your configuration.

$ $PETSC_DIR/lib/petsc/bin/petscmpiexec -n 8 ./petsc_program_name petsc_options

Certain options are supported by all PETSc programs. We list a few particularly useful ones below; a complete list can be obtained by running any PETSc program with the option -help.

-log_view - summarize the program’s performance (see Profiling)
-fp_trap - stop on floating-point exceptions; for example divide by zero
-malloc_dump - enable memory tracing; dump list of unfreed memory at conclusion of the run, see Detecting Memory Allocation Problems and Memory Usage,
-malloc_debug - enable memory debugging (by default, this is activated for the debugging version of PETSc), see Detecting Memory Allocation Problems and Memory Usage,
-start_in_debugger [noxterm,gdb,lldb] [-display name] - start all (or a subset of the) processes in a debugger. See Debugging, for more information on debugging PETSc programs.
-on_error_attach_debugger [noxterm,gdb,lldb] [-display name] - start debugger only on encountering an error
-info - print a great deal of information about what the program is doing as it runs
-version - display the version of PETSc being used

Writing PETSc Programs#

Most PETSc programs begin with a call to

PetscInitialize(int *argc,char ***argv,char *file,char *help);

which initializes PETSc and MPI. The arguments argc and argv are the usual command line arguments in C and C++ programs. The argument file optionally indicates an alternative name for the PETSc options file, .petscrc, which resides by default in the user’s home directory. Runtime Options provides details regarding this file and the PETSc options database, which can be used for runtime customization. The final argument, help, is an optional character string that will be printed if the program is run with the -help option. In Fortran, the initialization command has the form

call PetscInitialize(character(*) file,integer ierr)

where the file argument is optional.

PetscInitialize() automatically calls MPI_Init() if MPI has not been not previously initialized. In certain circumstances in which MPI needs to be initialized directly (or is initialized by some other library), the user can first call MPI_Init() (or have the other library do it), and then call PetscInitialize(). By default, PetscInitialize() sets the PETSc “world” communicator PETSC_COMM_WORLD to MPI_COMM_WORLD.

For those unfamiliar with MPI, a communicator indicates a collection of processes that will be involved in a calculation or communication. Communicators have the variable type MPI_Comm. In most cases, users can employ the communicator PETSC_COMM_WORLD to indicate all processes in a given run and PETSC_COMM_SELF to indicate a single process.

MPI provides routines for generating new communicators consisting of subsets of processors, though most users rarely need to use these. The book Using MPI, by Lusk, Gropp, and Skjellum [GLS94] provides an excellent introduction to the concepts in MPI. See also the MPI homepage. Note that PETSc users need not program much message passing directly with MPI, but they must be familiar with the basic concepts of message passing and distributed memory computing.

All PETSc programs should call PetscFinalize() as their final (or nearly final) statement. This routine handles options to be called at the conclusion of the program and calls MPI_Finalize() if PetscInitialize() began MPI. If MPI was initiated externally from PETSc (by either the user or another software package), the user is responsible for calling MPI_Finalize().

Error Checking#

Most PETSc functions return a PetscErrorCode, an integer indicating whether an error occurred during the call. The error code is set to be nonzero if an error has been detected; otherwise, it is zero. For the C/C++ interface, the error variable is the routine’s return value, while for the Fortran version, each PETSc routine has an integer error variable as its final argument.

One should always check these routine values as given below in the C/C++ formats, respectively:

PetscCall(PetscFunction(Args));

or for Fortran

! within the main program
PetscCallA(PetscFunction(Args,ierr))

! within any subroutine
PetscCall(PetscFunction(Args,ierr))

These macros check the returned error code, and if it is nonzero, they call the PETSc error handler and then return from the function with the error code. The macros above should be used on all PETSc calls to enable a complete error traceback. See Error Checking for more details on PETSc error handling.

Simple PETSc Examples#

To help the user use PETSc immediately, we begin with a simple uniprocessor example that solves the one-dimensional Laplacian problem with finite differences. This sequential code illustrates the solution of a linear system with KSP, the interface to the preconditioners, Krylov subspace methods and direct linear solvers of PETSc. Following the code, we highlight a few of the most important parts of this example.

Listing: KSP Tutorial src/ksp/ksp/tutorials/ex1.c

static char help[] = "Solves a tridiagonal linear system with KSP.\n\n";

/*
  Include "petscksp.h" so that we can use KSP solvers.  Note that this file
  automatically includes:
     petscsys.h    - base PETSc routines   petscvec.h - vectors
     petscmat.h    - matrices              petscpc.h  - preconditioners
     petscis.h     - index sets
     petscviewer.h - viewers

  Note:  The corresponding parallel example is ex23.c
*/
#include <petscksp.h>

int main(int argc, char **args)
{
  Vec         x, b, u; /* approx solution, RHS, exact solution */
  Mat         A;       /* linear system matrix */
  KSP         ksp;     /* linear solver context */
  PC          pc;      /* preconditioner context */
  PetscReal   norm;    /* norm of solution error */
  PetscInt    i, n = 10, col[3], its;
  PetscMPIInt size;
  PetscScalar value[3];

  PetscFunctionBeginUser;
  PetscCall(PetscInitialize(&argc, &args, (char *)0, help));
  PetscCallMPI(MPI_Comm_size(PETSC_COMM_WORLD, &size));
  PetscCheck(size == 1, PETSC_COMM_WORLD, PETSC_ERR_WRONG_MPI_SIZE, "This is a uniprocessor example only!");

  PetscCall(PetscOptionsGetInt(NULL, NULL, "-n", &n, NULL));

  /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
         Compute the matrix and right-hand-side vector that define
         the linear system, Ax = b.
     - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */

  /*
     Create vectors.  Note that we form 1 vector from scratch and
     then duplicate as needed.
  */
  PetscCall(VecCreate(PETSC_COMM_SELF, &x));
  PetscCall(PetscObjectSetName((PetscObject)x, "Solution"));
  PetscCall(VecSetSizes(x, PETSC_DECIDE, n));
  PetscCall(VecSetFromOptions(x));
  PetscCall(VecDuplicate(x, &b));
  PetscCall(VecDuplicate(x, &u));

  /*
     Create matrix.  When using MatCreate(), the matrix format can
     be specified at runtime.

     Performance tuning note:  For problems of substantial size,
     preallocation of matrix memory is crucial for attaining good
     performance. See the matrix chapter of the users manual for details.
  */
  PetscCall(MatCreate(PETSC_COMM_SELF, &A));
  PetscCall(MatSetSizes(A, PETSC_DECIDE, PETSC_DECIDE, n, n));
  PetscCall(MatSetFromOptions(A));
  PetscCall(MatSetUp(A));

  /*
     Assemble matrix
  */
  value[0] = -1.0;
  value[1] = 2.0;
  value[2] = -1.0;
  for (i = 1; i < n - 1; i++) {
    col[0] = i - 1;
    col[1] = i;
    col[2] = i + 1;
    PetscCall(MatSetValues(A, 1, &i, 3, col, value, INSERT_VALUES));
  }
  i      = n - 1;
  col[0] = n - 2;
  col[1] = n - 1;
  PetscCall(MatSetValues(A, 1, &i, 2, col, value, INSERT_VALUES));
  i        = 0;
  col[0]   = 0;
  col[1]   = 1;
  value[0] = 2.0;
  value[1] = -1.0;
  PetscCall(MatSetValues(A, 1, &i, 2, col, value, INSERT_VALUES));
  PetscCall(MatAssemblyBegin(A, MAT_FINAL_ASSEMBLY));
  PetscCall(MatAssemblyEnd(A, MAT_FINAL_ASSEMBLY));

  /*
     Set exact solution; then compute right-hand-side vector.
  */
  PetscCall(VecSet(u, 1.0));
  PetscCall(MatMult(A, u, b));

  /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
                Create the linear solver and set various options
     - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
  PetscCall(KSPCreate(PETSC_COMM_SELF, &ksp));

  /*
     Set operators. Here the matrix that defines the linear system
     also serves as the matrix that defines the preconditioner.
  */
  PetscCall(KSPSetOperators(ksp, A, A));

  /*
     Set linear solver defaults for this problem (optional).
     - By extracting the KSP and PC contexts from the KSP context,
       we can then directly call any KSP and PC routines to set
       various options.
     - The following four statements are optional; all of these
       parameters could alternatively be specified at runtime via
       KSPSetFromOptions();
  */
  PetscCall(KSPGetPC(ksp, &pc));
  PetscCall(PCSetType(pc, PCJACOBI));
  PetscCall(KSPSetTolerances(ksp, 1.e-5, PETSC_DEFAULT, PETSC_DEFAULT, PETSC_DEFAULT));

  /*
    Set runtime options, e.g.,
        -ksp_type <type> -pc_type <type> -ksp_monitor -ksp_rtol <rtol>
    These options will override those specified above as long as
    KSPSetFromOptions() is called _after_ any other customization
    routines.
  */
  PetscCall(KSPSetFromOptions(ksp));

  /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
                      Solve the linear system
     - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
  PetscCall(KSPSolve(ksp, b, x));

  /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
                      Check the solution and clean up
     - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
  PetscCall(VecAXPY(x, -1.0, u));
  PetscCall(VecNorm(x, NORM_2, &norm));
  PetscCall(KSPGetIterationNumber(ksp, &its));
  PetscCall(PetscPrintf(PETSC_COMM_SELF, "Norm of error %g, Iterations %" PetscInt_FMT "\n", (double)norm, its));

  /* check that KSP automatically handles the fact that the new non-zero values in the matrix are propagated to the KSP solver */
  PetscCall(MatShift(A, 2.0));
  PetscCall(KSPSolve(ksp, b, x));

  /*
     Free work space.  All PETSc objects should be destroyed when they
     are no longer needed.
  */
  PetscCall(KSPDestroy(&ksp));

  /* test if prefixes properly propagate to PCMPI objects */
  if (PCMPIServerActive) {
    PetscCall(KSPCreate(PETSC_COMM_SELF, &ksp));
    PetscCall(KSPSetOptionsPrefix(ksp, "prefix_test_"));
    PetscCall(MatSetOptionsPrefix(A, "prefix_test_"));
    PetscCall(KSPSetOperators(ksp, A, A));
    PetscCall(KSPSetFromOptions(ksp));
    PetscCall(KSPSolve(ksp, b, x));
    PetscCall(KSPDestroy(&ksp));
  }

  PetscCall(VecDestroy(&x));
  PetscCall(VecDestroy(&u));
  PetscCall(VecDestroy(&b));
  PetscCall(MatDestroy(&A));

  /*
     Always call PetscFinalize() before exiting a program.  This routine
       - finalizes the PETSc libraries as well as MPI
       - provides summary and diagnostic information if certain runtime
         options are chosen (e.g., -log_view).
  */
  PetscCall(PetscFinalize());
  return 0;
}

Include Files#

The C/C++ include files for PETSc should be used via statements such as

#include <petscksp.h>

where petscksp.h is the include file for the linear solver library. Each PETSc program must specify an include file corresponding to the highest level PETSc objects needed within the program; all of the required lower level include files are automatically included within the higher level files. For example, petscksp.h includes petscmat.h (matrices), petscvec.h (vectors), and petscsys.h (base PETSc file). The PETSc include files are located in the directory $PETSC_DIR/include. See Modules and Include Files for a discussion of PETSc include files in Fortran programs.

The Options Database#

As shown in Simple PETSc Examples, the user can input control data at run time using the options database. In this example the command PetscOptionsGetInt(NULL,NULL,"-n",&n,&flg); checks whether the user has provided a command line option to set the value of n, the problem dimension. If so, the variable n is set accordingly; otherwise, n remains unchanged. A complete description of the options database may be found in Runtime Options.

Vectors#

One creates a new parallel or sequential vector, x, of global dimension M with the commands

VecCreate(MPI_Comm comm,Vec *x);
VecSetSizes(Vec x, PetscInt m, PetscInt M);

where comm denotes the MPI communicator and m is the optional local size which may be PETSC_DECIDE. The type of storage for the vector may be set with either calls to VecSetType() or VecSetFromOptions(). Additional vectors of the same type can be formed with

VecDuplicate(Vec old,Vec *new);

The commands

VecSet(Vec x,PetscScalar value);
VecSetValues(Vec x,PetscInt n,PetscInt *indices,PetscScalar *values,INSERT_VALUES);

respectively set all the components of a vector to a particular scalar value and assign a different value to each component. More detailed information about PETSc vectors, including their basic operations, scattering/gathering, index sets, and distributed arrays is available in Chapter Vectors and Parallel Data.

Note the use of the PETSc variable type PetscScalar in this example. PetscScalar is defined to be double in C/C++ (or correspondingly double precision in Fortran) for versions of PETSc that have not been compiled for use with complex numbers. The PetscScalar data type enables identical code to be used when the PETSc libraries have been compiled for use with complex numbers. Numbers discusses the use of complex numbers in PETSc programs.

Matrices#

The usage of PETSc matrices and vectors is similar. The user can create a new parallel or sequential matrix, A, which has M global rows and N global columns, with the routines

MatCreate(MPI_Comm comm,Mat *A);
MatSetSizes(Mat A,PETSC_DECIDE,PETSC_DECIDE,PetscInt M,PetscInt N);

where the matrix format can be specified at runtime via the options database. The user could alternatively specify each processes’ number of local rows and columns using m and n.

MatSetSizes(Mat A,PetscInt m,PetscInt n,PETSC_DETERMINE,PETSC_DETERMINE);

Generally, one then sets the “type” of the matrix, with, for example,

MatSetType(A,MATAIJ);

This causes the matrix A to use the compressed sparse row storage format to store the matrix entries. See MatType for a list of all matrix types. Values can then be set with the command

MatSetValues(Mat A,PetscInt m,PetscInt *im,PetscInt n,PetscInt *in,PetscScalar *values,INSERT_VALUES);

After all elements have been inserted into the matrix, it must be processed with the pair of commands

MatAssemblyBegin(A,MAT_FINAL_ASSEMBLY);
MatAssemblyEnd(A,MAT_FINAL_ASSEMBLY);

Matrices discusses various matrix formats as well as the details of some basic matrix manipulation routines.

Linear Solvers#

After creating the matrix and vectors that define a linear system, Ax $=$ b, the user can then use KSP to solve the system with the following sequence of commands:

KSPCreate(MPI_Comm comm,KSP *ksp);
KSPSetOperators(KSP ksp,Mat Amat,Mat Pmat);
KSPSetFromOptions(KSP ksp);
KSPSolve(KSP ksp,Vec b,Vec x);
KSPDestroy(KSP ksp);

The user first creates the KSP context and sets the operators associated with the system (matrix that defines the linear system, Amat and matrix from which the preconditioner is constructed, Pmat ). The user then sets various options for customized solutions, solves the linear system, and finally destroys the KSP context. The command KSPSetFromOptions() enables the user to customize the linear solution method at runtime using the options database, which is discussed in Runtime Options. Through this database, the user not only can select an iterative method and preconditioner, but can also prescribe the convergence tolerance, set various monitoring routines, etc. (see, e.g., Profiling Programs).

KSP: Linear System Solvers describes in detail the KSP package, including the PC and KSP packages for preconditioners and Krylov subspace methods.

Nonlinear Solvers#

PETSc provides an interface to tackle nonlinear problems called SNES. SNES: Nonlinear Solvers describes the nonlinear solvers in detail. We highly recommend most PETSc users work directly with SNES, rather than using PETSc for the linear problem and writing their own nonlinear solver. Similarly, users should use TS rather than rolling their own time integrators.

Error Checking#

As noted above, PETSc functions return a PetscErrorCode, which is an integer indicating whether an error has occurred during the call. Below, we indicate a traceback generated by error detection within a sample PETSc program. The error occurred on line 3618 of the file $PETSC_DIR/src/mat/impls/aij/seq/aij.c``was caused by trying to allocate too large an array in memory. The routine was called in the program ``ex3.c on line 66. See Error Checking for details regarding error checking when using the PETSc Fortran interface.

$ cd $PETSC_DIR/src/ksp/ksp/tutorials
$ make ex3
$ mpiexec -n 1 ./ex3 -m 100000
[0]PETSC ERROR: --------------------- Error Message --------------------------------
[0]PETSC ERROR: Out of memory. This could be due to allocating
[0]PETSC ERROR: too large an object or bleeding by not properly
[0]PETSC ERROR: destroying unneeded objects.
[0]PETSC ERROR: Memory allocated 11282182704 Memory used by process 7075897344
[0]PETSC ERROR: Try running with -malloc_dump or -malloc_view for info.
[0]PETSC ERROR: Memory requested 18446744072169447424
[0]PETSC ERROR: Petsc Development GIT revision: v3.7.1-224-g9c9a9c5  GIT Date: 2016-05-18 22:43:00 -0500
[0]PETSC ERROR: ./ex3 on a arch-darwin-double-debug named Patricks-MacBook-Pro-2.local by patrick Mon Jun 27 18:04:03 2016
[0]PETSC ERROR: Configure options PETSC_DIR=/Users/patrick/petsc PETSC_ARCH=arch-darwin-double-debug --download-mpich --download-f2cblaslapack --with-cc=clang --with-cxx=clang++ --with-fc=gfortran --with-debugging=1 --with-precision=double --with-scalar-type=real --with-viennacl=0 --download-c2html -download-sowing
[0]PETSC ERROR: #1 MatSeqAIJSetPreallocation_SeqAIJ() line 3618 in /Users/patrick/petsc/src/mat/impls/aij/seq/aij.c
[0]PETSC ERROR: #2 PetscTrMallocDefault() line 188 in /Users/patrick/petsc/src/sys/memory/mtr.c
[0]PETSC ERROR: #3 MatSeqAIJSetPreallocation_SeqAIJ() line 3618 in /Users/patrick/petsc/src/mat/impls/aij/seq/aij.c
[0]PETSC ERROR: #4 MatSeqAIJSetPreallocation() line 3562 in /Users/patrick/petsc/src/mat/impls/aij/seq/aij.c
[0]PETSC ERROR: #5 main() line 66 in /Users/patrick/petsc/src/ksp/ksp/tutorials/ex3.c
[0]PETSC ERROR: PETSc Option Table entries:
[0]PETSC ERROR: -m 100000
[0]PETSC ERROR: ----------------End of Error Message ------- send entire error message to [email protected]

When running the debug version [1] of the PETSc libraries, it checks for memory corruption (writing outside of array bounds , etc.). The macro CHKMEMQ can be called anywhere in the code to check the current status of the memory for corruption. By putting several (or many) of these macros into your code, you can usually easily track down in what small segment of your code the corruption has occurred. One can also use Valgrind to track down memory errors; see the FAQ.

For complete error handling, calls to MPI functions should be made with PetscCallMPI(MPI_Function(Args)). In Fortran subroutines use PetscCallMPI(MPI_Function(Args, ierr)) and in Fortran main use PetscCallMPIA(MPI_Function(Args, ierr)).

PETSc has a small number of C/C++-only macros that do not explicitly return error codes. These are used in the style

XXXBegin(Args);
other code
XXXEnd();

and include PetscOptionsBegin(), PetscOptionsEnd(), PetscObjectOptionsBegin(), PetscOptionsHeadBegin(), PetscOptionsHeadEnd(), PetscDrawCollectiveBegin(), PetscDrawCollectiveEnd(), MatPreallocateEnd(), and MatPreallocateBegin(). These should not be checked for error codes. Another class of functions with the Begin() and End() paradigm including MatAssemblyBegin(), and MatAssemblyEnd() do return error codes that should be checked.

PETSc also has a set of C/C++-only macros that return an object, or NULL if an error has been detected. These include PETSC_VIEWER_STDOUT_WORLD, PETSC_VIEWER_DRAW_WORLD, PETSC_VIEWER_STDOUT_(MPI_Comm), and PETSC_VIEWER_DRAW_(MPI_Comm).

Finally PetscObjectComm((PetscObject)x) returns the communicator associated with the object x or MPI_COMM_NULL if an error was detected.

Parallel and GPU Programming#

Numerical computing today has multiple levels of parallelism (concurrency).

Low-level, single instruction multiple data (SIMD) parallelism or, somewhat similar, on-GPU parallelism,
medium-level, multiple instruction multiple data shared memory parallelism (thread parallelism), and
high-level, distributed memory parallelism.

Traditional CPUs support the lower two levels via, for example, Intel AVX-like instructions (CPU SIMD parallelism) and Unix threads, often managed by using OpenMP pragmas (CPU OpenMP parallelism), (or multiple processes). GPUs also support the lower two levels via kernel functions (GPU kernel parallelism) and streams (GPU stream parallelism). Distributed memory parallelism is created by combining multiple CPUs and/or GPUs and using MPI for communication (MPI Parallelism).

In addition, there is also concurrency between computations (floating point operations) and data movement (from memory to caches and registers and via MPI between distinct memory nodes).

PETSc supports all these parallelism levels, but its strongest support is for MPI-based distributed memory parallelism.

MPI Parallelism#

Since PETSc uses the message-passing model for parallel programming and employs MPI for all interprocessor communication, the user can employ MPI routines as needed throughout an application code. However, by default, the user is shielded from many of the details of message passing within PETSc since these are hidden within parallel objects, such as vectors, matrices, and solvers. In addition, PETSc provides tools such as vector scatter and gather to assist in the management of parallel data.

Recall that the user must specify a communicator upon creation of any PETSc object (such as a vector, matrix, or solver) to indicate the processors over which the object is to be distributed. For example, as mentioned above, some commands for matrix, vector, and linear solver creation are:

MatCreate(MPI_Comm comm,Mat *A);
VecCreate(MPI_Comm comm,Vec *x);
KSPCreate(MPI_Comm comm,KSP *ksp);

The creation routines are collective on all processes in the communicator; thus, all processors in the communicator must call the creation routine. In addition, if a sequence of collective routines is being used, they must be called in the same order on each process.

The next example, given below, illustrates the solution of a linear system in parallel. This code, corresponding to KSP Tutorial ex2, handles the two-dimensional Laplacian discretized with finite differences, where the linear system is again solved with KSP. The code performs the same tasks as the sequential version within Simple PETSc Examples. Note that the user interface for initiating the program, creating vectors and matrices, and solving the linear system is exactly the same for the uniprocessor and multiprocessor examples. The primary difference between the examples in Simple PETSc Examples and here is each processor forms only its local part of the matrix and vectors in the parallel case.

Listing: KSP Tutorial src/ksp/ksp/tutorials/ex2.c

static char help[] = "Solves a linear system in parallel with KSP.\n\
Input parameters include:\n\
  -view_exact_sol   : write exact solution vector to stdout\n\
  -m <mesh_x>       : number of mesh points in x-direction\n\
  -n <mesh_y>       : number of mesh points in y-direction\n\n";

/*
  Include "petscksp.h" so that we can use KSP solvers.
*/
#include <petscksp.h>

int main(int argc, char **args)
{
  Vec         x, b, u; /* approx solution, RHS, exact solution */
  Mat         A;       /* linear system matrix */
  KSP         ksp;     /* linear solver context */
  PetscReal   norm;    /* norm of solution error */
  PetscInt    i, j, Ii, J, Istart, Iend, m = 8, n = 7, its;
  PetscBool   flg;
  PetscScalar v;

  PetscFunctionBeginUser;
  PetscCall(PetscInitialize(&argc, &args, (char *)0, help));
  PetscCall(PetscOptionsGetInt(NULL, NULL, "-m", &m, NULL));
  PetscCall(PetscOptionsGetInt(NULL, NULL, "-n", &n, NULL));
  /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
         Compute the matrix and right-hand-side vector that define
         the linear system, Ax = b.
     - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
  /*
     Create parallel matrix, specifying only its global dimensions.
     When using MatCreate(), the matrix format can be specified at
     runtime. Also, the parallel partitioning of the matrix is
     determined by PETSc at runtime.

     Performance tuning note:  For problems of substantial size,
     preallocation of matrix memory is crucial for attaining good
     performance. See the matrix chapter of the users manual for details.
  */
  PetscCall(MatCreate(PETSC_COMM_WORLD, &A));
  PetscCall(MatSetSizes(A, PETSC_DECIDE, PETSC_DECIDE, m * n, m * n));
  PetscCall(MatSetFromOptions(A));
  PetscCall(MatMPIAIJSetPreallocation(A, 5, NULL, 5, NULL));
  PetscCall(MatSeqAIJSetPreallocation(A, 5, NULL));
  PetscCall(MatSeqSBAIJSetPreallocation(A, 1, 5, NULL));
  PetscCall(MatMPISBAIJSetPreallocation(A, 1, 5, NULL, 5, NULL));
  PetscCall(MatMPISELLSetPreallocation(A, 5, NULL, 5, NULL));
  PetscCall(MatSeqSELLSetPreallocation(A, 5, NULL));

  /*
     Currently, all PETSc parallel matrix formats are partitioned by
     contiguous chunks of rows across the processors.  Determine which
     rows of the matrix are locally owned.
  */
  PetscCall(MatGetOwnershipRange(A, &Istart, &Iend));

  /*
     Set matrix elements for the 2-D, five-point stencil in parallel.
      - Each processor needs to insert only elements that it owns
        locally (but any non-local elements will be sent to the
        appropriate processor during matrix assembly).
      - Always specify global rows and columns of matrix entries.

     Note: this uses the less common natural ordering that orders first
     all the unknowns for x = h then for x = 2h etc; Hence you see J = Ii +- n
     instead of J = I +- m as you might expect. The more standard ordering
     would first do all variables for y = h, then y = 2h etc.

   */
  for (Ii = Istart; Ii < Iend; Ii++) {
    v = -1.0;
    i = Ii / n;
    j = Ii - i * n;
    if (i > 0) {
      J = Ii - n;
      PetscCall(MatSetValues(A, 1, &Ii, 1, &J, &v, ADD_VALUES));
    }
    if (i < m - 1) {
      J = Ii + n;
      PetscCall(MatSetValues(A, 1, &Ii, 1, &J, &v, ADD_VALUES));
    }
    if (j > 0) {
      J = Ii - 1;
      PetscCall(MatSetValues(A, 1, &Ii, 1, &J, &v, ADD_VALUES));
    }
    if (j < n - 1) {
      J = Ii + 1;
      PetscCall(MatSetValues(A, 1, &Ii, 1, &J, &v, ADD_VALUES));
    }
    v = 4.0;
    PetscCall(MatSetValues(A, 1, &Ii, 1, &Ii, &v, ADD_VALUES));
  }

  /*
     Assemble matrix, using the 2-step process:
       MatAssemblyBegin(), MatAssemblyEnd()
     Computations can be done while messages are in transition
     by placing code between these two statements.
  */
  PetscCall(MatAssemblyBegin(A, MAT_FINAL_ASSEMBLY));
  PetscCall(MatAssemblyEnd(A, MAT_FINAL_ASSEMBLY));

  /* A is symmetric. Set symmetric flag to enable ICC/Cholesky preconditioner */
  PetscCall(MatSetOption(A, MAT_SYMMETRIC, PETSC_TRUE));

  /*
     Create parallel vectors.
      - We form 1 vector from scratch and then duplicate as needed.
      - When using VecCreate(), VecSetSizes and VecSetFromOptions()
        in this example, we specify only the
        vector's global dimension; the parallel partitioning is determined
        at runtime.
      - When solving a linear system, the vectors and matrices MUST
        be partitioned accordingly.  PETSc automatically generates
        appropriately partitioned matrices and vectors when MatCreate()
        and VecCreate() are used with the same communicator.
      - The user can alternatively specify the local vector and matrix
        dimensions when more sophisticated partitioning is needed
        (replacing the PETSC_DECIDE argument in the VecSetSizes() statement
        below).
  */
  PetscCall(VecCreate(PETSC_COMM_WORLD, &u));
  PetscCall(VecSetSizes(u, PETSC_DECIDE, m * n));
  PetscCall(VecSetFromOptions(u));
  PetscCall(VecDuplicate(u, &b));
  PetscCall(VecDuplicate(b, &x));

  /*
     Set exact solution; then compute right-hand-side vector.
     By default we use an exact solution of a vector with all
     elements of 1.0;
  */
  PetscCall(VecSet(u, 1.0));
  PetscCall(MatMult(A, u, b));

  /*
     View the exact solution vector if desired
  */
  flg = PETSC_FALSE;
  PetscCall(PetscOptionsGetBool(NULL, NULL, "-view_exact_sol", &flg, NULL));
  if (flg) PetscCall(VecView(u, PETSC_VIEWER_STDOUT_WORLD));

  /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
                Create the linear solver and set various options
     - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
  PetscCall(KSPCreate(PETSC_COMM_WORLD, &ksp));

  /*
     Set operators. Here the matrix that defines the linear system
     also serves as the preconditioning matrix.
  */
  PetscCall(KSPSetOperators(ksp, A, A));

  /*
     Set linear solver defaults for this problem (optional).
     - By extracting the KSP and PC contexts from the KSP context,
       we can then directly call any KSP and PC routines to set
       various options.
     - The following two statements are optional; all of these
       parameters could alternatively be specified at runtime via
       KSPSetFromOptions().  All of these defaults can be
       overridden at runtime, as indicated below.
  */
  PetscCall(KSPSetTolerances(ksp, 1.e-2 / ((m + 1) * (n + 1)), 1.e-50, PETSC_DEFAULT, PETSC_DEFAULT));

  /*
    Set runtime options, e.g.,
        -ksp_type <type> -pc_type <type> -ksp_monitor -ksp_rtol <rtol>
    These options will override those specified above as long as
    KSPSetFromOptions() is called _after_ any other customization
    routines.
  */
  PetscCall(KSPSetFromOptions(ksp));

  /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
                      Solve the linear system
     - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */

  PetscCall(KSPSolve(ksp, b, x));

  /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
                      Check the solution and clean up
     - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
  PetscCall(VecAXPY(x, -1.0, u));
  PetscCall(VecNorm(x, NORM_2, &norm));
  PetscCall(KSPGetIterationNumber(ksp, &its));

  /*
     Print convergence information.  PetscPrintf() produces a single
     print statement from all processes that share a communicator.
     An alternative is PetscFPrintf(), which prints to a file.
  */
  PetscCall(PetscPrintf(PETSC_COMM_WORLD, "Norm of error %g iterations %" PetscInt_FMT "\n", (double)norm, its));

  /*
     Free work space.  All PETSc objects should be destroyed when they
     are no longer needed.
  */
  PetscCall(KSPDestroy(&ksp));
  PetscCall(VecDestroy(&u));
  PetscCall(VecDestroy(&x));
  PetscCall(VecDestroy(&b));
  PetscCall(MatDestroy(&A));

  /*
     Always call PetscFinalize() before exiting a program.  This routine
       - finalizes the PETSc libraries as well as MPI
       - provides summary and diagnostic information if certain runtime
         options are chosen (e.g., -log_view).
  */
  PetscCall(PetscFinalize());
  return 0;
}

CPU SIMD parallelism#

SIMD parallelism occurs most commonly in the Intel advanced vector extensions (AVX) Wikipedia https://en.wikipedia.org/wiki/Advanced_Vector_Extensions families of instructions. It may be automatically used by the optimizing compiler or in low-level libraries that PETSc uses, such as BLAS (see BLIS https://github.com/flame/blis, or rarely, directly in PETSc C/C++ code, as in MatMult_SeqSELL https://petsc.org/main/src/mat/impls/sell/seq/sell.c.html#MatMult_SeqSELL.

CPU OpenMP parallelism#

OpenMP parallelism is thread parallelism. Multiple threads (independent streams of instructions) process data and perform computations on different parts of memory that is shared (accessible) to all of the threads. The OpenMP model is based on inserting pragmas into code, indicating that a series of instructions (often within a loop) can be run in parallel. This is also called a fork-join model of parallelism since much of the code remains sequential and only the computationally expensive parts in the ‘parallel region’ are parallel. Thus, OpenMP makes it relatively easy to add some parallelism to a conventional sequential code in a shared memory environment.

POSIX threads (pthreads) is a library that may be called from C/C++. The library contains routines to create, join, and remove threads, plus manage communications and synchronizations between threads. Pthreads is rarely used directly in numerical libraries and applications. Sometimes OpenMP is implemented on top of pthreads.

If one adds OpenMP parallelism to an MPI code, one must not over-subscribe the hardware resources. For example, if MPI already has one MPI process (rank) per hardware core, then using four OpenMP threads per MPI process will slow the code down since now one core must switch back and forth between four OpenMP threads.

For application codes that use certain external packages, including BLAS/LAPACK, SuperLU_DIST, MUMPS, MKL, and SuiteSparse, one can build PETSc and these packages to take advantage of OpenMP by using the configure option --with-openmp. The number of OpenMP threads used in the application can be controlled with the PETSc command line option -omp_num_threads <num> or the environmental variable OMP_NUM_THREADS. Running a PETSc program with -omp_view will display the number of threads used. The default number is often absurdly high for the given hardware, so we recommend always setting it appropriately.

Users can also put OpenMP pragmas into their own code. However, since standard PETSc is not thread-safe, they should not, in general, call PETSc routines from inside the parallel regions.

There is an OpenMP thread-safe subset of PETSc that may be configured for using --with-threadsafety (often used along with --with-openmp or --download-concurrencykit). KSP Tutorial ex61f demonstrates how this may be used with OpenMP. In this mode, one may have individual OpenMP threads that each manage their own (sequential) PETSc objects (each thread can interact only with its own objects). This is useful when one has many small systems (or sets of ODEs) that must be integrated in an “embarrassingly parallel” fashion on multicore systems.

PETSc’s MPI-based linear solvers may be accessed from a sequential or non-MPI OpenMP program, see Using PETSc’s MPI parallel linear solvers from a non-MPI program.

GPU kernel parallelism#

GPUs offer at least two levels of clearly defined parallelism. Kernel-level parallelism is much like SIMD parallelism applied to loops; many “iterations” of the loop index run on different hardware in “lock-step”. PETSc utilizes this parallelism with three similar but slightly different models:

CUDA, which is provided by NVIDIA and runs on NVIDIA GPUs
HIP, provided by AMD, which can, in theory, run on both AMD and NVIDIA GPUs
and Kokkos, an open-source package that provides a slightly higher-level programming model to utilize GPU kernels.

To utilize this one configures PETSc with either –with-cuda or –with-hip and, if they plan to use Kokkos, also –download-kokkos –download-kokkos-kernels.

In the GPU programming model that PETSc uses, the GPU memory is distinct from the CPU memory. This means that data that resides on the CPU memory must be copied to the GPU (often, this copy is done automatically by the libraries, and the user does not need to manage it) if one wishes to use the GPU computational power on it. This memory copy is slow compared to the GPU speed; hence, it is crucial to minimize these copies. This often translates to trying to do almost all the computation on the GPU and not constantly switching between computations on the CPU and the GPU on the same data.

PETSc utilizes GPUs by providing vector and matrix classes (Vec and Mat) specifically written to run on the GPU. However, since it is difficult to write an entire PETSc code that runs only on the GPU, one can also access and work with (for example, put entries into) the vectors and matrices on the CPU. The vector classes are VECCUDA, MATAIJCUSPARSE, VECKOKKOS, MATAIJKOKKOS, and VECHIP (matrices are not yet supported by PETSc with HIP).

More details on using GPUs from PETSc will follow in this document.

GPU stream parallelism#

Please contribute to this document.

Compiling and Running Programs#

The output below illustrates compiling and running a PETSc program using MPICH on a macOS laptop. Note that different machines will have compilation commands as determined by the configuration process. See Writing C/C++ or Fortran Applications for a discussion about how to compile your PETSc programs. Users who are experiencing difficulties linking PETSc programs should refer to the FAQ.

$ cd $PETSC_DIR/src/ksp/ksp/tutorials
$ make ex2
/Users/patrick/petsc/arch-debug/bin/mpicc -o ex2.o -c -g3   -I/Users/patrick/petsc/include -I/Users/patrick/petsc/arch-debug/include `pwd`/ex2.c
/Users/patrick/petsc/arch-debug/bin/mpicc -g3  -o ex2 ex2.o  -Wl,-rpath,/Users/patrick/petsc/arch-debug/lib -L/Users/patrick/petsc/arch-debug/lib  -lpetsc -lf2clapack -lf2cblas -lmpifort -lgfortran -lgcc_ext.10.5 -lquadmath -lm -lclang_rt.osx -lmpicxx -lc++ -ldl -lmpi -lpmpi -lSystem
/bin/rm -f ex2.o
$ $PETSC_DIR/lib/petsc/bin/petscmpiexec -n 1 ./ex2
Norm of error 0.000156044 iterations 6
$ $PETSC_DIR/lib/petsc/bin/petscmpiexec -n 2 ./ex2
Norm of error 0.000411674 iterations 7

Profiling Programs#

The option -log_view activates printing of a performance summary, including times, floating point operation (flop) rates, and message-passing activity. Profiling provides details about profiling, including the interpretation of the output data below. This particular example involves the solution of a linear system on one processor using GMRES and ILU. The low floating point operation (flop) rates in this example are because the code solved a tiny system. We include this example merely to demonstrate the ease of extracting performance information.

$ $PETSC_DIR/lib/petsc/bin/petscmpiexec -n 1 ./ex1 -n 1000 -pc_type ilu -ksp_type gmres -ksp_rtol 1.e-7 -log_view
...
------------------------------------------------------------------------------------------------------------------------
Event                Count      Time (sec)     Flops                             --- Global ---  --- Stage ----  Total
                   Max Ratio  Max     Ratio   Max  Ratio  Mess   AvgLen  Reduct  %T %F %M %L %R  %T %F %M %L %R Mflop/s
------------------------------------------------------------------------------------------------------------------------

VecMDot                1 1.0 3.2830e-06 1.0 2.00e+03 1.0 0.0e+00 0.0e+00 0.0e+00  0  5  0  0  0   0  5  0  0  0   609
VecNorm                3 1.0 4.4550e-06 1.0 6.00e+03 1.0 0.0e+00 0.0e+00 0.0e+00  0 14  0  0  0   0 14  0  0  0  1346
VecScale               2 1.0 4.0110e-06 1.0 2.00e+03 1.0 0.0e+00 0.0e+00 0.0e+00  0  5  0  0  0   0  5  0  0  0   499
VecCopy                1 1.0 3.2280e-06 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00  0  0  0  0  0   0  0  0  0  0     0
VecSet                11 1.0 2.5537e-05 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00  2  0  0  0  0   2  0  0  0  0     0
VecAXPY                2 1.0 2.0930e-06 1.0 4.00e+03 1.0 0.0e+00 0.0e+00 0.0e+00  0 10  0  0  0   0 10  0  0  0  1911
VecMAXPY               2 1.0 1.1280e-06 1.0 4.00e+03 1.0 0.0e+00 0.0e+00 0.0e+00  0 10  0  0  0   0 10  0  0  0  3546
VecNormalize           2 1.0 9.3970e-06 1.0 6.00e+03 1.0 0.0e+00 0.0e+00 0.0e+00  1 14  0  0  0   1 14  0  0  0   638
MatMult                2 1.0 1.1177e-05 1.0 9.99e+03 1.0 0.0e+00 0.0e+00 0.0e+00  1 24  0  0  0   1 24  0  0  0   894
MatSolve               2 1.0 1.9933e-05 1.0 9.99e+03 1.0 0.0e+00 0.0e+00 0.0e+00  1 24  0  0  0   1 24  0  0  0   501
MatLUFactorNum         1 1.0 3.5081e-05 1.0 4.00e+03 1.0 0.0e+00 0.0e+00 0.0e+00  2 10  0  0  0   2 10  0  0  0   114
MatILUFactorSym        1 1.0 4.4259e-05 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00  3  0  0  0  0   3  0  0  0  0     0
MatAssemblyBegin       1 1.0 8.2015e-08 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00  0  0  0  0  0   0  0  0  0  0     0
MatAssemblyEnd         1 1.0 3.3536e-05 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00  2  0  0  0  0   2  0  0  0  0     0
MatGetRowIJ            1 1.0 1.5960e-06 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00  0  0  0  0  0   0  0  0  0  0     0
MatGetOrdering         1 1.0 3.9791e-05 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00  3  0  0  0  0   3  0  0  0  0     0
MatView                2 1.0 6.7909e-05 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00  5  0  0  0  0   5  0  0  0  0     0
KSPGMRESOrthog         1 1.0 7.5970e-06 1.0 4.00e+03 1.0 0.0e+00 0.0e+00 0.0e+00  1 10  0  0  0   1 10  0  0  0   526
KSPSetUp               1 1.0 3.4424e-05 1.0 0.00e+00 0.0 0.0e+00 0.0e+00 0.0e+00  2  0  0  0  0   2  0  0  0  0     0
KSPSolve               1 1.0 2.7264e-04 1.0 3.30e+04 1.0 0.0e+00 0.0e+00 0.0e+00 19 79  0  0  0  19 79  0  0  0   121
PCSetUp                1 1.0 1.5234e-04 1.0 4.00e+03 1.0 0.0e+00 0.0e+00 0.0e+00 11 10  0  0  0  11 10  0  0  0    26
PCApply                2 1.0 2.1022e-05 1.0 9.99e+03 1.0 0.0e+00 0.0e+00 0.0e+00  1 24  0  0  0   1 24  0  0  0   475
------------------------------------------------------------------------------------------------------------------------

Memory usage is given in bytes:

Object Type          Creations   Destructions     Memory  Descendants' Mem.
Reports information only for process 0.

--- Event Stage 0: Main Stage

              Vector     8              8        76224     0.
              Matrix     2              2       134212     0.
       Krylov Solver     1              1        18400     0.
      Preconditioner     1              1         1032     0.
           Index Set     3              3        10328     0.
              Viewer     1              0            0     0.
========================================================================================================================
...

Writing C/C++ or Fortran Applications#

The examples throughout the library demonstrate the software usage and can serve as templates for developing custom applications. We suggest that new PETSc users examine programs in the directories $PETSC_DIR/src/<library>/tutorials where <library> denotes any of the PETSc libraries (listed in the following section), such as SNES or KSP, TS, or TAO. The manual pages at https://petsc.org/release/documentation/ provide links (organized by routine names and concepts) to the tutorial examples.

To develop an application program that uses PETSc, we suggest the following:

Download and install PETSc.
For completely new applications
1. Make a directory for your source code: for example, mkdir $HOME/application
2. Change to that directory, for example, cd $HOME/application
3. Copy an example in the directory that corresponds to the problems of interest into your directory, for example, cp $PETSC_DIR/src/snes/tutorials/ex19.c app.c
4. Select an application build process. The PETSC_DIR (and PETSC_ARCH if the --prefix=directoryname option was not used when configuring PETSc) environmental variable(s) must be set for any of these approaches.
  - make (recommended). It uses the pkg-config tool and is the recommended approach. Copy $PETSC_DIR/share/petsc/Makefile.user or $PETSC_DIR/share/petsc/Makefile.basic.user to your directory, for example, cp $PETSC_DIR/share/petsc/Makefile.user makefile
    
    Examine the comments in this makefile.
    
    Makefile.user uses the pkg-config tool and is the recommended approach.
    
    Use make app to compile your program.
  - CMake. Copy $PETSC_DIR/share/petsc/CMakeLists.txt to your directory, for example, cp $PETSC_DIR/share/petsc/CMakeLists.txt CMakeLists.txt
    
    Edit CMakeLists.txt, read the comments on usage, and change the name of the application from ex1 to your application executable name.
5. Run the program, for example, ./app
6. Start to modify the program to develop your application.
For adding PETSc to an existing application
1. Start with a working version of your code that you build and run to confirm that it works.
2. Upgrade your build process. The PETSC_DIR (and PETSC_ARCH if the --prefix=directoryname option was not used when configuring PETSc) environmental variable(s) must be set for any of these approaches.
  - Using make. Update the application makefile to add the appropriate PETSc include directories and libraries.
    
    Recommended approach. Examine the comments in $PETSC_DIR/share/petsc/Makefile.user and transfer selected portions of that file to your makefile.
    
    Minimalist. Add the line
    
    include ${PETSC_DIR}/lib/petsc/conf/variables
    
    to the bottom of your makefile. This will provide a set of PETSc-specific make variables you may use in your makefile. See the comments in the file $PETSC_DIR/share/petsc/Makefile.basic.user for details on the usage.
    
    Simple, but hands the build process over to PETSc’s control. Add the lines
    
    include ${PETSC_DIR}/lib/petsc/conf/variables include ${PETSC_DIR}/lib/petsc/conf/rules
    
    to the bottom of your makefile. See the comments in the file $PETSC_DIR/share/petsc/Makefile.basic.user for details on the usage. Since PETSc’s rules now control the build process, you will likely need to simplify and remove much of the material that is in your makefile.
    
    Not recommended since you must change your makefile for each new configuration/computing system. This approach does not require the environmental variable PETSC_DIR to be set when building your application since the information will be hardwired in your makefile. Run the following command in the PETSc root directory to get the information needed by your makefile:
    
    $ make getlinklibs getincludedirs getcflags getcxxflags getfortranflags getccompiler getfortrancompiler getcxxcompiler
    
    All the libraries listed need to be linked into your executable, and the include directories and flags need to be passed to the compiler(s). Usually, this is done by setting LDFLAGS=<list of library flags and libraries> and CFLAGS=<list of -I and other flags> and FFLAGS=<list of -I and other flags> etc in your makefile.
  - Using CMake. Update the application CMakeLists.txt by examining the code and comments in $PETSC_DIR/share/petsc/CMakeLists.txt
3. Rebuild your application and ensure it still runs correctly.
4. Add a PetscInitialize() near the beginning of your code and PetscFinalize() near the end with appropriate include commands (and use statements in Fortran).
5. Rebuild your application and ensure it still runs correctly.
6. Slowly start utilizing PETSc functionality in your code, and ensure that your code continues to build and run correctly.

PETSc’s Object-Oriented Design#

Though PETSc has a large API, conceptually, it’s rather simple. There are three abstract basic data objects (classes): index sets, IS, vectors, Vec, and matrices, Mat. Plus, a larger number of abstract algorithm objects (classes) starting with: preconditioners, PC, Krylov solvers, KSP, and so forth.

Let Object represent any of these objects. Objects are created with

Object obj;
ObjectCreate(MPI_Comm, &obj);

The object is initially empty, and little can be done with it. A particular implementation of the class is associated with the object by setting the object’s “type”, where type is merely a string name of an implementation class using

ObjectSetType(obj,"ImplementationName");

Some objects support subclasses, which are specializations of the type. These are set with

ObjectNameSetType(obj,"ImplementationSubName");

For example, within TS one may do

TS ts;
TSCreate(PETSC_COMM_WORLD,&ts);
TSSetType(ts,TSARKIMEX);
TSARKIMEXSetType(ts,TSARKIMEX3);

The abstract class TS can embody any ODE/DAE integrator scheme. This example creates an additive Runge-Kutta ODE/DAE IMEX integrator, whose type name is TSARKIMEX, using a 3rd-order scheme with an L-stable implicit part, whose subtype name is TSARKIMEX3.

To allow PETSc objects to be runtime configurable, PETSc objects provide a universal way of selecting types (classes) and subtypes at runtime from what is referred to as the PETSc “options database”. The code above can be replaced with

TS obj;
TSCreate(PETSC_COMM_WORLD,&obj);
TSSetFromOptions(obj);

now, both the type and subtype can be conveniently set from the command line

$ ./app -ts_type arkimex -ts_arkimex_type 3

The object’s type (implementation class) or subclass can also be changed at any time simply by calling TSSetType() again (though to override command line options, the call to TSSetType() must be made _after_ TSSetFromOptions()). For example:

// (if set) command line options "override" TSSetType()
TSSetType(ts, TSGLLE);
TSSetFromOptions(ts);

// TSSetType() overrides command line options
TSSetFromOptions(ts);
TSSetType(ts, TSGLLE);

Since the later call always overrides the earlier call, the second form shown is rarely – if ever – used, as it is less flexible than configuring command line settings.

The standard methods on an object are of the general form.

ObjectSetXXX(obj,...);
ObjectGetXXX(obj,...);
ObjectYYY(obj,...);

For example

TSSetRHSFunction(obj,...)

Particular types and subtypes of objects may have their own methods, which are given in the form

ObjectNameSetXXX(obj,...);
ObjectNameGetXXX(obj,...);
ObjectNameYYY(obj,...);

and

ObjectNameSubNameSetXXX(obj,...);
ObjectNameSubNameGetXXX(obj,...);
ObjectNameSubNameYYY(obj,...);

where Name and SubName are the type and subtype names (for example, as above TSARKIMEX and 3. Most “set” operations have options database versions with the same names in lower case, separated by underscores, and with the word “set” removed. For example,

KSPGMRESSetRestart(obj,30);

can be set at the command line with

$ ./app -ksp_gmres_restart 30

A special subset of type-specific methods is ignored if the type does not match the function name. These are usually setter functions that control some aspect specific to the subtype. For example,

KSPGMRESSetRestart(obj,30);   // ignored if the type is not KSPGMRES

These allow cleaner application code since it does not have many if statements to avoid inactive methods. That is, one does not need to write code like

if (type == KSPGMRES) {     // unneeded clutter
  KSPGMRESSetRestart(obj,30);
}

Many “get” routines give one temporary access to an object’s internal data. They are used in the style

XXX xxx;
ObjectGetXXX(obj,&xxx);
// use xxx
ObjectRestoreXXX(obj,&xxx);

Objects obtained with a “get” routine should be returned with a “restore” routine, generally within the same function. Objects obtained with a “create” routine should be freed with a “destroy” routine.

There may be variants of the “get” routines that give more limited access to the obtained object. For example,

const PetscScalar *x;

// specialized variant of VecGetArray()
VecGetArrayRead(vec, &x);
// one can read but not write with x[]
PetscReal y = 2*x[0];
// don't forget to restore x after you are done with it
VecRestoreArrayRead(vec, &x);

Objects can be displayed (in a large number of ways) with

ObjectView(obj,PetscViewer viewer);
ObjectViewFromOptions(obj,...);

Where PetscViewer is an abstract object that can represent standard output, an ASCII or binary file, a graphical window, etc. The second variant allows the user to delay until runtime the decision of what viewer and format to use to view the object or if to view the object at all.

Objects are destroyed with

ObjectDestroy(&obj)

../_images/objectlife.svg — Fig. 2 Sample lifetime of a PETSc object#

User Callbacks#

The user may wish to override or provide custom functionality in many situations. This is handled via callbacks, which the library will call at the appropriate time. The most general way to apply a callback has this form:

ObjecCallbackSetter(obj, callbackfunction(), void *ctx, contextdestroy(void *ctx));

where PetscObjectCallbackSetter() is a callback setter such as SNESSetFunction(). callbackfunction() is what will be called by the library, ctx is an optional data structure (array, struct, PETSc object) that is used by callbackfunction() and contextdestroy(void *ctx) is an optional function that will be called when obj is destroyed to free anything in ctx. The use of the contextdestroy() allows users to “set and forget” data structures that will not be needed elsewhere but still need to be deleted when no longer needed. Here is an example of the use of a full-fledged callback

TS              ts;
TSMonitorLGCtx *ctx;

TSMonitorLGCtxCreate(..., &ctx)
TSMonitorSet(ts, TSMonitorLGTimeStep, ctx, (PetscErrorCode(*)(void **))TSMonitorLGCtxDestroy);
TSSolve(ts);

Occasionally, routines to set callback functions take additional data objects that will be used by the object but are not context data for the function. For example,

SNES obj;
Vec  r;
void *ctx;

SNESSetFunction(snes, r, UserApplyFunction(SNES,Vec,Vec,void *ctx), ctx);

The r vector is an optional argument provided by the user, which will be used as work-space by SNES. Note that this callback does not provide a way for the user to have the ctx destroyed when the SNES object is destroyed; the users must ensure that they free it at an appropriate time. There is no logic to the various ways PETSc accepts callback functions in different places in the code.

See Tao use of PETSc and callbacks for a cartoon on callbacks in Tao.

Directory Structure#

We conclude this introduction with an overview of the organization of the PETSc software. The root directory of PETSc contains the following directories:

doc The source code and Python scripts for building the website and documentation
lib/petsc/conf - Base PETSc configuration files that define the standard make variables and rules used by PETSc
include - All include files for PETSc that are visible to the user.
include/petsc/finclude - PETSc Fortran include files.
include/petsc/private - Private PETSc include files that should not need to be used by application programmers.
share - Some small test matrices and other data files
src - The source code for all PETSc libraries, which currently includes
- vec - vectors,
  - is - index sets,
- mat - matrices,
- ksp - complete linear equations solvers,
  - ksp - Krylov subspace accelerators,
  - pc - preconditioners,
- snes - nonlinear solvers
- ts - ODE/DAE solvers and timestepping,
- tao - optimizers,
- dm - data management between meshes and solvers, vectors, and matrices,
- sys - general system-related routines,
  - logging - PETSc logging and profiling routines,
  - classes - low-level classes
    - draw - simple graphics,
    - viewer - a mechanism for printing and visualizing PETSc objects,
    - bag - mechanism for saving and loading from disk user data stored in C structs.
    - random - random number generators.

Each PETSc source code library directory has the following subdirectories:

tutorials - Programs designed to teach users about PETSc.
These codes can serve as templates for applications.
tests - Programs designed for thorough testing of PETSc. As
such, these codes are not intended for examination by users.
interface - Provides the abstract base classes for the objects. The code here does not know about particular implementations and does not perform operations on the underlying numerical data.
impls - Source code for one or more implementations of the class for a particular data structures or algorithms.
utils - Utility routines. The source here may know about the implementations, but ideally, will not know about implementations for other components.

Footnotes

[For94]

MPI Forum. MPI: a message-passing interface standard. International J. Supercomputing Applications, 1994.

[GLS94]

William Gropp, Ewing Lusk, and Anthony Skjellum. Using MPI: Portable Parallel Programming with the Message Passing Interface. MIT Press, 1994.

Getting Started#

Suggested Reading#

Running PETSc Programs#

Writing PETSc Programs#

Error Checking#

Simple PETSc Examples#

Include Files#

The Options Database#

Vectors#

Matrices#

Linear Solvers#

Nonlinear Solvers#

Error Checking#

Parallel and GPU Programming#

MPI Parallelism#

CPU SIMD parallelism#

CPU OpenMP parallelism#

GPU kernel parallelism#

GPU stream parallelism#

Compiling and Running Programs#

Profiling Programs#

Writing C/C++ or Fortran Applications#

PETSc’s Object-Oriented Design#

User Callbacks#

Directory Structure#