Developing PETSc Documentation#

General Guidelines#

  • Good documentation should be like a bonsai tree: alive, on display, frequently tended, and as small as possible (adapted from these best practices).

  • Wrong, irrelevant, or confusing documentation is worse than no documentation.

Documentation with Sphinx#

We use Sphinx to build our web pages and documentation. Most content is written using reStructuredText, a simple markup language.

These slides contain an overview of Sphinx and how we use(d) it, as of October 2020.

Building the HTML docs locally#

We use a a Python 3 virtual environment to build the documentation since not all developers can trivially install the needed Python modules directly.

$ cd $PETSC_DIR
$ make docs
$ open doc/_build/html/index.html  # in a browser

or

$ cd $PETSC_DIR/doc
$ make sphinxhtml
$ open _build/html/index.html

Building the manual locally as a PDF via LaTeX#

Note

Before following these instructions, you need to have a working local LaTeX installation and the ability to install additional packages, if need be, to resolve LaTeX errors.

Set up your local Python environment (e.g., ref:as above <sec_local_html_docs>), then

$ cd doc
$ make sphinxpdf
$ open _build/latex/manual.pdf  # in PDF viewer

Sphinx Documentation Guidelines#

Refer to Sphinx’s own documentation for general information on how to use Sphinx, and note the following additional guidelines.

  • Use the literalinclude directive to directly include pieces of source code. Use a path beginning with /, relative to the root for the Sphinx docs (where conf.py is found).

    .. literalinclude:: /../src/sys/error/err.c
       :start-at: PetscErrorCode PetscError(
       :end-at: PetscFunctionReturn(PETSC_SUCCESS)
       :append: }
    

    For robustness to changes in the source files, Use :start-at: and related options when possible, noting that you can also use (positive) values of :lines: relative to this. Use the :language: option to appropriately highlight languages other than C.

  • Any invocable command line statements longer than a few words should be in .. code-block:: sections. Double backticks must enclose any such statements not in code-block statements”``”. For example make all is acceptable but

    $ make PETSC_DIR=/my/path/to/petsc PETSC_ARCH=my-petsc-arch all
    

    should be in a .. code-block::.

  • All code blocks showing command line invocation must use the “console” block directive. E.g.

    .. code-block:: console
    
       $ cd $PETSC_DIR/src/snes/interface
       $ ./someprog
       output1
       output2
    

    The only exception to this is when displaying raw output, i.e., with no preceding commands. Then one may use just the “::” directive to improve visibility, e.g.,

    ::
    
       output1
       output2
    
  • Any code blocks that show command line invocations must be preceded by $, e.g.

    .. code-block:: console
    
       $ ./configure --some-args
       $ make libs
       $ make ./ex1
       $ ./ex1 --some-args
    
  • Environment variables such as $PETSC_DIR or $PATH must be preceded by $ and be enclosed in double backticks, e.g.

    Set ``$PETSC_DIR`` and ``$PETSC_ARCH``
    
  • For internal links, use explicit labels, e.g

    .. _sec_short_name:
    
    Section name
    ============
    

    and elsewhere (in any document),

    See :ref:`link text <sec_short_name>`
    
  • For internal links in the manual with targets outside the manual, always provide alt text so that the text will be properly formatted in the standalone PDF manual, e.g.

    PETSc has :doc:`mailing lists </community/mailing>`.
    
  • We use the sphinxcontrib-bibtex extension to include citations from BibTeX files. You must include .. bibliography:: blocks at the bottom of a page, including citations (example). To cite the same reference on more than one page, use this workaround on one of them (example) 1.

  • See special instructions on Images.

  • Prefer formatting styles that are easy to modify and maintain. In particular, the use of list-table is recommended.

  • When using external links with inline URLs, prefer to use anonymous hyperlink references with two trailing underscores, e.g.

    `link text <https://external.org>`__
    
  • To pluralize something with inline markup, e.g. DMs, escape the trailing character to avoid WARNING: Inline literal start-string without end-string.

    ``DM``\s
    
  • Use restraint in adding new Sphinx extensions, in particular, those which aren’t widely used and well-supported, or those with hidden system dependencies.

Other PETSc repositories#

In addition to the PETSc repository, there are three other PETSc repositories which contain large data files that are unnecessary for most PETSc usages and thus are not stored in the main repository. Images contains images that are used in the PETSc documentation or have other uses. Annual-Meetings contains the slides etc. from the Annual PETSc Meetings. Datafiles contains large matrices, meshes, and various other data files that are used in the PETSc CI. Other repositories containing software PETSc uses are located at GitLab and BitBucket. The BitBucket location is used for historical reasons, there are many links on the web to these locations thus the repositories have not be migrated to GitLab.

Images#

PETSc’s documentation is tightly coupled to the source code and tests and is tracked in the primary PETSc Git repository. However, image files are too large to track directly this way (especially because they persist in the integration branches’ histories).

Therefore, we store image files in a separate Git repository, Images. This repository is automatically cloned if not already available when building the documentation. It can also be cloned by running make images in the doc/ directory. Any new images required must be added to the currently-used branch of this repository.

Image Guidelines#

  • Whenever possible, use SVG files. SVG is a web-friendly vector format and will be automatically converted to PDF using rsvg-convert 2

  • Avoid large files and large numbers of images.

  • Do not add movies or other non-image files.

Adding new images#

  • Decide where in doc/images a new image should go. Use the structure of the doc/ tree as a guide.

  • Create a Merge Request to the currently-used branch of the upstream images repository, adding this image 3.

  • Once this Merge Request is merged, you may make a MR relying on the new image(s).

It may be helpful to place working copies of the new image(s) in your local doc/images while iterating on documentation; don’t forget to update the upstream images repository.

Removing, renaming, moving, or updating images#

Do not directly move, rename, or update images in the images repository. Simply add a logically-numbered new version of the image.

If an image is not used in any integration branch (main or release), add it to the top-level list of files to delete in the images repository.

Cleaning up the images repository (maintainers only)#

If the size of the image repository grows too large,

  • Create a new branch main-X, where X increments the current value

  • Create a new commit deleting all files in the to-delete list and clearing the list

  • Reset the new main-X to a single commit with this new, cleaned-up state

  • Set main-X as the “default” branch on GitLab.

  • Update both release and main in the primary PETSc repository to clone this new branch

Building Classic Documentation#

Some of the documentation is built by a “classic” process as described below using the documentation tools listed below, which are automatically downloaded and installed if needed while building the PETSc documentation./

Sowing and C2html are build tools that do not use the compilers specified to PETSc’s configure, as they need to work in cross-compilation environments. Thus, they default to using gcc, g++, and flex from the user’s environment (or configure options like --download-sowing-cxx). Microsoft Windows users must install gcc etc., from Cygwin in order to be able to build the documentation.

Footnotes

1

The extensions’s development branch supports our use case better (:footcite:), which can be investigated if a release is ever made. This stuff is now in the main repository but does not work as advertised from .md files.

2

rsvg-convert is installable with your package manager, e.g., librsvg2-bin on Debian/Ubuntu systems).

3

Maintainers may directly push commits.