.. _ch_matlab: Using MATLAB with PETSc ----------------------- There are three basic ways to use MATLAB with PETSc: #. :any:`sec_matlabdump` into files to be read into MATLAB, #. :any:`sec_matlabsocket` from a running PETSc program to a MATLAB process where you may interactively type MATLAB commands (or run scripts), and #. :any:`sec_matlabengine` to send data back and forth between PETSc and MATLAB where MATLAB commands are issued, not interactively, but from a script or the PETSc program (this uses the MATLAB Engine). For the latter two approaches one must ``./configure`` PETSc with the argument ``--with-matlab [--with-matlab-dir=matlab_root_directory]``. .. _sec_matlabdump: Dumping Data for MATLAB ~~~~~~~~~~~~~~~~~~~~~~~ Dumping ASCII MATLAB data ^^^^^^^^^^^^^^^^^^^^^^^^^ One can dump PETSc matrices and vectors to the screen in an ASCII format that MATLAB can read in directly. This is done with the command line options ``-vec_view ::ascii_matlab`` or ``-mat_view ::ascii_matlab``. To write a file, use ``-vec_view :filename.m:ascii_matlab`` or ``-mat_view :filename.m:ascii_matlab``. This causes the PETSc program to print the vectors and matrices every time ``VecAssemblyEnd()`` or ``MatAssemblyEnd()`` are called. To provide finer control over when and what vectors and matrices are dumped one can use the ``VecView()`` and ``MatView()`` functions with a viewer type of ``PETSCVIEWERASCII`` (see ``PetscViewerASCIIOpen()``, ``PETSC_VIEWER_STDOUT_WORLD``, ``PETSC_VIEWER_STDOUT_SELF``, or ``PETSC_VIEWER_STDOUT_(MPI_Comm)``). Before calling the viewer set the output type with, for example, .. code-block:: PetscViewerPushFormat(PETSC_VIEWER_STDOUT_WORLD,PETSC_VIEWER_ASCII_MATLAB); VecView(A,PETSC_VIEWER_STDOUT_WORLD); PetscViewerPopFormat(PETSC_VIEWER_STDOUT_WORLD); The name of each PETSc variable printed for MATLAB may be set with .. code-block:: PetscObjectSetName((PetscObject)A,"name"); If no name is specified, the object is given a default name using ``PetscObjectName()``. Dumping Binary Data for MATLAB ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ One can also read PETSc binary files (see :any:`sec_viewers`) directly into MATLAB via the scripts available in ``$PETSC_DIR/share/petsc/matlab``. This requires less disk space and is recommended for all but the smallest data sizes. One can also use .. code-block:: PetscViewerPushFormat(viewer,PETSC_VIEWER_BINARY_MATLAB) to dump both a PETSc binary file and a corresponding ``.info`` file which ``PetscReadBinaryMatlab.m`` will use to format the binary file in more complex cases, such as using a ``DMDA``. For an example, see `DM Tutorial ex7 `__. In MATLAB one may then generate a useful structure. For example: .. code-block:: matlab setenv('PETSC_DIR','~/petsc'); setenv('PETSC_ARCH','arch-darwin-double-debug'); addpath('~/petsc/share/petsc/matlab'); gridData=PetscReadBinaryMatlab('output_file'); .. _sec_matlabsocket: Sending Data to an Interactive MATLAB Session ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ One creates a viewer to MATLAB via .. code-block:: PetscViewerSocketOpen(MPI_Comm,char *machine,int port,PetscViewer *v); (``port`` is usually set to ``PETSC_DEFAULT``; use ``NULL`` for the machine if the MATLAB interactive session is running on the same machine as the PETSc program) and then sends matrices or vectors via .. code-block:: VecView(Vec A,v); MatView(Mat B,v); See :any:`sec_viewers` for more on PETSc viewers. One may start the MATLAB program manually or use the PETSc command ``PetscStartMatlab(MPI_Comm,char *machine,char *script,FILE **fp)``; where ``machine`` and ``script`` may be ``NULL``. It is also possible to start your PETSc program from MATLAB via ``launch()``. To receive the objects in MATLAB, make sure that ``$PETSC_DIR/$PETSC_ARCH/lib/petsc/matlab`` and ``$PETSC_DIR/share/petsc/matlab`` are in the MATLAB path. Use ``p = PetscOpenSocket();`` (or ``p = PetscOpenSocket(portnum)`` if you provided a port number in your call to ``PetscViewerSocketOpen()``), and then ``a = PetscBinaryRead(p);`` returns the object passed from PETSc. ``PetscBinaryRead()`` may be called any number of times. Each call should correspond on the PETSc side with viewing a single vector or matrix. ``close()`` closes the connection from MATLAB. On the PETSc side, one should destroy the viewer object with ``PetscViewerDestroy()``. For an example, which includes sending data back to PETSc, see `Vec Tutorial ex42 `__ and the associated ``.m`` file. .. _sec_matlabengine: Using the MATLAB Compute Engine ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ One creates access to the MATLAB engine via .. code-block:: PetscMatlabEngineCreate(MPI_Comm comm,char *machine,PetscMatlabEngine *e); where ``machine`` is the name of the machine hosting MATLAB (``NULL`` may be used for localhost). One can send objects to MATLAB via .. code-block:: PetscMatlabEnginePut(PetscMatlabEngine e,PetscObject obj); One can get objects via .. code-block:: PetscMatlabEngineGet(PetscMatlabEngine e,PetscObject obj); Similarly, one can send arrays via .. code-block:: PetscMatlabEnginePutArray(PetscMatlabEngine e,int m,int n,PetscScalar *array,char *name); and get them back via .. code-block:: PetscMatlabEngineGetArray(PetscMatlabEngine e,int m,int n,PetscScalar *array,char *name); One cannot use MATLAB interactively in this mode but one can send MATLAB commands via .. code-block:: PetscMatlabEngineEvaluate(PetscMatlabEngine,"format",...); where ``format`` has the usual ``printf()`` format. For example, .. code-block:: PetscMatlabEngineEvaluate(PetscMatlabEngine,"x = \%g *y + z;",avalue); The name of each PETSc variable passed to MATLAB may be set with .. code-block:: PetscObjectSetName((PetscObject)A,"name"); Text responses can be returned from MATLAB via .. code-block:: PetscMatlabEngineGetOutput(PetscMatlabEngine,char **); or .. code-block:: PetscMatlabEnginePrintOutput(PetscMatlabEngine,FILE*). There is a short-cut to starting the MATLAB engine with ``PETSC_MATLAB_ENGINE_(MPI_Comm)``. If you are running PETSc on a cluster (or machine) that does not have a license for MATLAB, you might be able to run MATLAB on the ``head node`` of the cluster or some other machine accessible to the cluster using the ``-matlab_engine_host hostname`` option. Licensing the MATLAB Compute Engine on a cluster ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ To activate MATLAB on head node which does not have access to the internet. [#matlabsection_footnote]_ First ssh into the head node using the command: ssh node_name Obtain the Host Id using the command: ip addr | grep ether [#matlabsection_footnote2]_ You will see something like this: link/ether xx:xx:xx:xx:xx:xx ABC yy:yy:yy:yy:yy:yy Note the value: xx:xx:xx:xx:xx:xx Login to your MathWorks Account from a computer which has internet access. You will see the available license that your account has. Select a license from the list. .. figure:: /images/docs/manual/mathworks-account.png Then, select Install and Activate option and select the Activate to Retrieve License File option. .. figure:: /images/docs/manual/mathworks-account-2.png Enter the information and click Continue. .. figure:: /images/docs/manual/mathworks-account-3.png An option to download the License file will appear. Download it and copy the license file to the cluster (your home directory). Now, launch MATLAB where you have sshed into your head node. .. figure:: /images/docs/manual/mathworks-account-4.png Select the Activate manually without the internet option and click Next >. Browse and locate the license file. .. figure:: /images/docs/manual/mathworks-account-5.png MATLAB is activated and ready to use. .. rubric:: Footnotes .. [#matlabsection_footnote] https://www.mathworks.com/matlabcentral/answers/259627-how-do-i-activate-matlab-or-other-mathworks-products-without-an-internet-connection .. [#matlabsection_footnote2] http://www.mathworks.com/matlabcentral/answers/101892