2: #include <../src/mat/impls/aij/seq/aij.h>

  4: extern PetscErrorCode MatInodeAdjustForInodes_SeqAIJ_Inode(Mat,IS*,IS*);
  5: extern PetscErrorCode MatInodeGetInodeSizes_SeqAIJ_Inode(Mat,PetscInt*,PetscInt*[],PetscInt*);

  7: PetscErrorCode MatView_SeqAIJ_Inode(Mat A,PetscViewer viewer)
  8: {
  9:   Mat_SeqAIJ        *a=(Mat_SeqAIJ*)A->data;
 10:   PetscErrorCode    ierr;
 11:   PetscBool         iascii;
 12:   PetscViewerFormat format;

 15:   PetscObjectTypeCompare((PetscObject)viewer,PETSCVIEWERASCII,&iascii);
 16:   if (iascii) {
 17:     PetscViewerGetFormat(viewer,&format);
 18:     if (format == PETSC_VIEWER_ASCII_INFO_DETAIL || format == PETSC_VIEWER_ASCII_INFO) {
 19:       if (a->inode.size) {
 20:         PetscViewerASCIIPrintf(viewer,"using I-node routines: found %D nodes, limit used is %D\n",a->inode.node_count,a->inode.limit);
 21:       } else {
 22:         PetscViewerASCIIPrintf(viewer,"not using I-node routines\n");
 23:       }
 24:     }
 25:   }
 26:   return(0);
 27: }

 29: PetscErrorCode MatAssemblyEnd_SeqAIJ_Inode(Mat A, MatAssemblyType mode)
 30: {
 31:   Mat_SeqAIJ     *a = (Mat_SeqAIJ*)A->data;

 35:   MatSeqAIJCheckInode(A);
 36:   a->inode.ibdiagvalid = PETSC_FALSE;
 37:   return(0);
 38: }

 40: PetscErrorCode MatDestroy_SeqAIJ_Inode(Mat A)
 41: {
 43:   Mat_SeqAIJ     *a=(Mat_SeqAIJ*)A->data;

 46:   PetscFree(a->inode.size);
 47:   PetscFree3(a->inode.ibdiag,a->inode.bdiag,a->inode.ssor_work);
 48:   PetscObjectComposeFunction((PetscObject)A,"MatInodeAdjustForInodes_C",NULL);
 49:   PetscObjectComposeFunction((PetscObject)A,"MatInodeGetInodeSizes_C",NULL);
 50:   return(0);
 51: }

 53: /* MatCreate_SeqAIJ_Inode is not DLLEXPORTed because it is not a constructor for a complete type.    */
 54: /* It is also not registered as a type for use within MatSetType.                             */
 55: /* It is intended as a helper for the MATSEQAIJ class, so classes which desire Inodes should  */
 56: /*    inherit off of MATSEQAIJ instead by calling MatSetType(MATSEQAIJ) in their constructor. */
 57: /* Maybe this is a bad idea. (?) */
 58: PetscErrorCode MatCreate_SeqAIJ_Inode(Mat B)
 59: {
 60:   Mat_SeqAIJ     *b=(Mat_SeqAIJ*)B->data;
 62:   PetscBool      no_inode,no_unroll;

 65:   no_inode             = PETSC_FALSE;
 66:   no_unroll            = PETSC_FALSE;
 67:   b->inode.checked     = PETSC_FALSE;
 68:   b->inode.node_count  = 0;
 69:   b->inode.size        = NULL;
 70:   b->inode.limit       = 5;
 71:   b->inode.max_limit   = 5;
 72:   b->inode.ibdiagvalid = PETSC_FALSE;
 73:   b->inode.ibdiag      = NULL;
 74:   b->inode.bdiag       = NULL;

 76:   PetscOptionsBegin(PetscObjectComm((PetscObject)B),((PetscObject)B)->prefix,"Options for SEQAIJ matrix","Mat");
 77:   PetscOptionsBool("-mat_no_unroll","Do not optimize for inodes (slower)",NULL,no_unroll,&no_unroll,NULL);
 78:   if (no_unroll) {
 79:     PetscInfo(B,"Not using Inode routines due to -mat_no_unroll\n");
 80:   }
 81:   PetscOptionsBool("-mat_no_inode","Do not optimize for inodes -slower-",NULL,no_inode,&no_inode,NULL);
 82:   if (no_inode) {
 83:     PetscInfo(B,"Not using Inode routines due to -mat_no_inode\n");
 84:   }
 85:   PetscOptionsInt("-mat_inode_limit","Do not use inodes larger then this value",NULL,b->inode.limit,&b->inode.limit,NULL);
 86:   PetscOptionsEnd();

 88:   b->inode.use = (PetscBool)(!(no_unroll || no_inode));
 89:   if (b->inode.limit > b->inode.max_limit) b->inode.limit = b->inode.max_limit;

 91:   PetscObjectComposeFunction((PetscObject)B,"MatInodeAdjustForInodes_C",MatInodeAdjustForInodes_SeqAIJ_Inode);
 92:   PetscObjectComposeFunction((PetscObject)B,"MatInodeGetInodeSizes_C",MatInodeGetInodeSizes_SeqAIJ_Inode);
 93:   return(0);
 94: }

 96: PetscErrorCode MatSetOption_SeqAIJ_Inode(Mat A,MatOption op,PetscBool flg)
 97: {
 98:   Mat_SeqAIJ *a=(Mat_SeqAIJ*)A->data;

101:   switch (op) {
102:   case MAT_USE_INODES:
103:     a->inode.use = flg;
104:     break;
105:   default:
106:     break;
107:   }
108:   return(0);
109: }